Wachsmann
Well-Known Member
I know everyone has there on way and not trying to be a butt head but I quit along time ago at starting at less than half max published data. After the powder shortage I quit starting low and working through a full long drawn out process. I generally have found if you find published data for a load you can start at 3/4 of that load and work your way up and then I will push till I get an ejector swipe. I'm also looking at what the case fill was supposed to be as how full is it. I generally found powders that fill in the 95 to 100% range produce the most velocities with the most consistency. I don't pull bullets a whole lot but maybe couple times a year. I also shoot probably 3000 to 6000 rounds a year between my 7 rifles. Actually one has bit the dust. It needs a barrel change. Also one of the main reasons I run a 308. I also have the 6.5 creed just haven't really put it on the bench a lot. Will see if these are 2 hot today. My other 205 is probably going to be what I hunt with. Apparently they also run about the exact same load data spread. So really testing that today. May take a milk jug out for the 7mm-08 to see if I can get another hit at distance. Really hoping that my 308 load will have lower ES. Would like to do the milk jug with it also. Will see if I can get some video footage of the milk jug.