Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Shotguns
12ga,10ga,8ga,4ga FH;585HE/700HE, other Big Bores--
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="hubel458" data-source="post: 1218394" data-attributes="member: 6474"><p>. </p><p>Here is a helix driver seal we made by cutting base from helix driver</p><p></p><p>wadcup, good for fullbore roundballs that are too big to go in cup.</p><p></p><p>Best one to cut off is shortest `12ga one BPI has.</p><p></p><p></p><p><img src="http://www.gunownerstv.com/helixseal.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /> </p><p></p><p></p><p></p><p>Here is picture of a 585HE made on a Stiller bolt action for guy in Canada.</p><p></p><p>It was made for the poster Spooksar on Africa Hunting and Accuratereloading, </p><p></p><p>by Corlanes/Rocky Mountain rifles, in Dawson Creek BC Canada, with a </p><p></p><p>Stiller action, Timney trigger. the stock is a blue/grey laminate. He imported </p><p></p><p>the barrel, cases, dies, etc.. from us, through Prophet River in Lloydminster AB. </p><p></p><p></p><p><img src="http://www.gunownerstv.com/spooksar.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /> </p><p></p><p></p><p></p><p>That action similar to Lawton we had and neighbor got, that won the King Of The</p><p></p><p>2 Mile shoot at Whittington, with the 375 Lethal cartridge the neighbor made,</p><p></p><p> from our 585 brass. Made it full length case,.. It is big one on the right. </p><p></p><p>He made an 18 lb gun with McMillan target stock, a huge scope, tripod..</p><p></p><p>Nice thing is we don't need BMG action.</p><p></p><p></p><p><img src="http://www.gunownerstv.com/375lethal.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /> </p><p></p><p></p><p></p><p>Here is picture of a case a Trex owner made using our 585 brass, by putting</p><p></p><p>a piece of 11/16 tubing ,cut a piece 2/10 of an inch long with a tube cutter chamfered </p><p></p><p>the cut side a bit and tapped it on the case down to the belt with the brass pipe </p><p></p><p>and fireformed it in the T Rex chamber.......Made a perfect fitting case. </p><p></p><p>Cut our brass to 3" to fit shorter trex specs. He was out of brass</p><p></p><p>and couldn't find more, so he invented his own. And our rim was big</p><p></p><p>enough so his extractor still worked ok....His original Trex case base is .685"</p><p></p><p>and our rim and belt on first case run, is .655" diameter, and base ahead</p><p></p><p>of the belt on unfired cases .631" and the brass sleave pushed up tight to the </p><p></p><p>belt just takes up that little difference. Ed. </p><p></p><p></p><p><img src="http://www.gunownerstv.com/herex.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p></blockquote><p></p>
[QUOTE="hubel458, post: 1218394, member: 6474"] . Here is a helix driver seal we made by cutting base from helix driver wadcup, good for fullbore roundballs that are too big to go in cup. Best one to cut off is shortest `12ga one BPI has. [IMG]http://www.gunownerstv.com/helixseal.jpg[/IMG] Here is picture of a 585HE made on a Stiller bolt action for guy in Canada. It was made for the poster Spooksar on Africa Hunting and Accuratereloading, by Corlanes/Rocky Mountain rifles, in Dawson Creek BC Canada, with a Stiller action, Timney trigger. the stock is a blue/grey laminate. He imported the barrel, cases, dies, etc.. from us, through Prophet River in Lloydminster AB. [IMG]http://www.gunownerstv.com/spooksar.jpg[/IMG] That action similar to Lawton we had and neighbor got, that won the King Of The 2 Mile shoot at Whittington, with the 375 Lethal cartridge the neighbor made, from our 585 brass. Made it full length case,.. It is big one on the right. He made an 18 lb gun with McMillan target stock, a huge scope, tripod.. Nice thing is we don't need BMG action. [IMG]http://www.gunownerstv.com/375lethal.jpg[/IMG] Here is picture of a case a Trex owner made using our 585 brass, by putting a piece of 11/16 tubing ,cut a piece 2/10 of an inch long with a tube cutter chamfered the cut side a bit and tapped it on the case down to the belt with the brass pipe and fireformed it in the T Rex chamber.......Made a perfect fitting case. Cut our brass to 3" to fit shorter trex specs. He was out of brass and couldn't find more, so he invented his own. And our rim was big enough so his extractor still worked ok....His original Trex case base is .685" and our rim and belt on first case run, is .655" diameter, and base ahead of the belt on unfired cases .631" and the brass sleave pushed up tight to the belt just takes up that little difference. Ed. [IMG]http://www.gunownerstv.com/herex.jpg[/IMG] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Shotguns
12ga,10ga,8ga,4ga FH;585HE/700HE, other Big Bores--
Top