Shot those on 200 yard line. I have a Win Mod 70 Classic in 270WSM those 110V-Maxs shoot great About 1" at 200yds. Can't wait to shoot a coyote with those pills.
110 V-Max out of 270WSM
- Thread starter Iron Worker
- Start date
Help Support Long Range Hunting Forum
keithcandler
Well-Known Member
- Joined
- Jan 30, 2005
- Messages
- 650
Iornworker, mind sharing your load?
I have been wanting to try them in my 270, also.
I have been wanting to try them in my 270, also.
Re: Iornworker, mind sharing your load?
He'll be back, but till then here's some info.
keithcandler : hope you are talking 270wsm.
For me the 110s are shooting very well also.
Much less distance between the land contact point and
the tip of the bullet than heavier ones.
COL is shorter than my 140/150 NosBT jam distance by .180 !!!
and .140 less than the 150gr Hornady SST-z.
my rifle seems to like a little lowwer loads (pressure)
, at about 1/3 up from bottom loads sometimes starts to see signs.
Here are the ones i've tried.
Rifle shows a little better for pressure now than when it was new.
It has smoothed out a little, leaded the buttstock.
imr4350 (high/low) 66/56 from one source 64max from anotter
started at 61gr .. too hot went to 60.5 ok
RL-19 71/62
started @ 64 .. wasn't sure
went to 63.7 ok
dropped to 63.5
could probably go back up now, haven't tried.
this one spread laterally 1 1/2 in initially for me
haven't rechecked since rifle improvements.
imr 7828 no data avail for 110
don't know if this is the best powder for 110s
speeds looked good for 130s, gave it a try
130gr 65 and 68 max refs found
110 67 start .020 off lands.. too hot maybe
went to 66.7 br2 good
now 7828 67gr. cci250m col 2.675 .. .045 off lands
Same COL as I started, but lands were .020 closer then.
necked down ww 300 brass, burnished inside primer bell to wall burrs.
I can't shoot these any more @ 100 yards cuz they are grouping so small
it's hard to tell what they're really doing (in the .4s). Only at 200 yards+ for these.
No crony, no fps, Im guessing low 3300s, might be less.
Let me know if you want the target pic posted here.
kinda looks like this though "
Hope this helps
Mark
He'll be back, but till then here's some info.
keithcandler : hope you are talking 270wsm.
For me the 110s are shooting very well also.
Much less distance between the land contact point and
the tip of the bullet than heavier ones.
COL is shorter than my 140/150 NosBT jam distance by .180 !!!
and .140 less than the 150gr Hornady SST-z.
my rifle seems to like a little lowwer loads (pressure)
, at about 1/3 up from bottom loads sometimes starts to see signs.
Here are the ones i've tried.
Rifle shows a little better for pressure now than when it was new.
It has smoothed out a little, leaded the buttstock.
imr4350 (high/low) 66/56 from one source 64max from anotter
started at 61gr .. too hot went to 60.5 ok
RL-19 71/62
started @ 64 .. wasn't sure
went to 63.7 ok
dropped to 63.5
could probably go back up now, haven't tried.
this one spread laterally 1 1/2 in initially for me
haven't rechecked since rifle improvements.
imr 7828 no data avail for 110
don't know if this is the best powder for 110s
speeds looked good for 130s, gave it a try
130gr 65 and 68 max refs found
110 67 start .020 off lands.. too hot maybe
went to 66.7 br2 good
now 7828 67gr. cci250m col 2.675 .. .045 off lands
Same COL as I started, but lands were .020 closer then.
necked down ww 300 brass, burnished inside primer bell to wall burrs.
I can't shoot these any more @ 100 yards cuz they are grouping so small
it's hard to tell what they're really doing (in the .4s). Only at 200 yards+ for these.
No crony, no fps, Im guessing low 3300s, might be less.
Let me know if you want the target pic posted here.
kinda looks like this though "
Hope this helps
Mark
Re: Iornworker, mind sharing your load?
Sorry about the delay. Back then I was loading 68 grs of Re#19 . I don't know how I got 1" groups at 200 yds. Currently shooting 67grs of Re#17 with 110 V-Max and only getting "Ok" accuracy. My rifle is a off the shelf Win Mod 70 classic with laminate stock Added a nice glass bedding job and some other goodies. Most of the time I can get 1" 3 shot groups at 100 yds. I'd either like to sell it or when economy gets better re-barrel it with some thing nice.
Sorry about the delay. Back then I was loading 68 grs of Re#19 . I don't know how I got 1" groups at 200 yds. Currently shooting 67grs of Re#17 with 110 V-Max and only getting "Ok" accuracy. My rifle is a off the shelf Win Mod 70 classic with laminate stock Added a nice glass bedding job and some other goodies. Most of the time I can get 1" 3 shot groups at 100 yds. I'd either like to sell it or when economy gets better re-barrel it with some thing nice.
