1/2" AR500 Targets Cheap

[ntxshooter]

I have some AR500 plates I cut for targets. Most of this is 1/2" thick and I am selling cheaper than what you can find the thinner stuff for online.
14" - ALL SOLD
12" - ALL Sold
10" - 35.00 - SOLD
8" - 25.00 - SOLD

*** See Below as I cut up some 3/8" plate into round Gongs. Only have 8" and 6" left in those! ***

A few left of each at the moment. Plates will fit in a medium flat rate USPS box for 13.60.

Also cut some 3/8" into 24" pieces for longer ranges (not pictured)- 125.00 ALL SOLD

ar-2 by NTX Shooter, on Flickr

 

[ntxshooter]

Bump...a few 10" and 8" left

 

[DUSTY NOGGIN]

Bump...a few 10" and 8" left

super cheap , basically at cost of material,

way to give back to the shooting world

 

[ntxshooter]

Thanks..also cut some 3/8" thick gongs.
8" for 15.00 each!

 

[scottyboy]

Will the 3/8" be good for .284-.30cal at 300+yds?

 

[ntxshooter]

Velocity at impact is recommended to be below 2800 fps there abouts. Will work great depending on cartridge

 

[gjk5]

I will take a couple 10" if you still have some

 

[ntxshooter]

Will the 3/8" be good for .284-.30cal at 300+yds?

Sorry, I answered this a while ago but inserted a chart so post is awaiting moderators...it will work fine for most cartridges, just want velocity at impact to b ed below 2800 fps

I will take a couple 10" if you still have some

You got it..PM coming, thanks

 

[Rilow]

Can I get 2 of the 10in and 2 of the 8in 3/8

 

[ntxshooter]

Can I get 2 of the 10in and 2 of the 8in 3/8

PM Coming

 

[ntxshooter]

Cut the last of what I have. Couple of the 182" plates left but the following 3/8" plates cut as gongs...
10" - 25.00
8" - 15.00
6" - 10.00

 

[Rilow]

Good guy to deal with received mine today n they look good

 

[ntxshooter]

Appreciate the kind words.

Updated the OP with Quantity changes. Here's a pic of the 3/8" gongs I have too

8gong by NTX Shooter, on Flickr

 

[gjk5]

got mine, look good despite the USPS best efforts to destroy them LOL, thank you.