#longrangehunting

Well, We are only 13 rounds in, and the rifle is doing very well. Grs Bifrost Stock, Benchmark Barrel 8.5 twist drop in, Savage Action with 1lb trigger spring, APA little Bastard Break, Atlas Bipod, Northland Shooter Lug, and Vortex PST Gen 2. We are shooting new Nosler brass that has been...

We are going to do our best to hold out for a mature deer. Practicing up on what to look for.

The next four days our targets are 30% off. The discount is automatic at purchase. https://www.boxtobenchprecision.com/store/

I am having some good results with the custom drag model. Anyone else use these? I was shooting the 7 mag with the 195 EOL out to 800 yards a couple days ago. Ballistic AE had me at 16.75 moa, where as Applied Ballistics was 17 moa. I needed that extra .25 moa. Quick little video of the...

I decided to do a ladder test with 7828 SSC out of my 7 Mag. The gun was shooting well with the 7828 SSC node. I decided to go with mostly .3 grains steps instead of .2 grains. We were talking about how most ladder tests are done with only one round per charge weight, so I wanted to change...

I was reading a post about annealing and the vast differences shooters take regarding the subject. Some don't anneal, some anneal every 2nd or 3rd round, some burn their brass with torch heads, some use Tempilaq which only shows you get your brass to a certain temperature, some use an AMP...

I donated my time and was able to help the owner of a special late season hunt for whitetail here in Northeast Washington. This buck in the film is 1.10 miles. You can count tines and get a great idea what your looking at as far as trophy quality. He was looking for a buck over 150". He was...

The 195 EOL for the 7mm looked to be a really impressive bullet, but it appeared to be for the bigger cartridges in the 7mm family. I looked at Berger's Load Data for the 7 Rem Mag and thought, if I could get 2 extra inches of barrel, I could push the bullet fast enough for the Rem Mag. I...