-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
7/300 PRC seating die
- Thread starter RevXP_09
- Start date
Help Support Long Range Hunting Forum
Huntnful
Well-Known Member
I have several necked down wild cats and just use the standard cartridge size for the seating die. I end up with very little runout and excellent groups. So in your case, whatever 300 PRC seating die that suites your fancy.
If you can get a 300 PRC in line die for an arbor press and buy the 7mm bullet seating stem, this has worked for me well.
Huntaddict
Well-Known Member
I have had a 7/300 for 5 years.
Reading 300 PRC type S with a 310 bushing
Buying 300 PRC brass. you will likely need 3 bushings. 323. 317. 310.
Reading 300 PRC type S with a 310 bushing
Buying 300 PRC brass. you will likely need 3 bushings. 323. 317. 310.
I have looked at SAC die for an arbor press but was trying to avoid buying another press and their $400+ dollar die.
I was looking at custom Redding dies but they're 20 weeks out. The necking down isn't an issues I'll be basically doing what @Huntaddict said for sizing, just trying to find the best option for bullet seating.
I was looking at custom Redding dies but they're 20 weeks out. The necking down isn't an issues I'll be basically doing what @Huntaddict said for sizing, just trying to find the best option for bullet seating.
You can also buy a 7 mm seating stem for some seating dies, like Hornady and Redding competition line of dies. Getting an K&M arbor press and a LE Wilson seating die will probably be more
Like $220 way cheaper than SAC
Like $220 way cheaper than SAC
