hydehunter
Well-Known Member
after pulling bullets from loaded cases is it necessary to resize a straight wall cases before seating different bullets? thanks
I probably already know the answer
- Thread starter hydehunter
- Start date
Help Support Long Range Hunting Forum
Critter Picker
Well-Known Member
I do,just to make sure that I have uniform neck tension. All my straight wall cases I use carbide dies, they go pretty quick.
Yes
Rick Richard
Well-Known Member
Another Yes.
hydehunter
Well-Known Member
thanks
crashlanding
Well-Known Member
What about if you're crimping after seating? I'm curious
hydehunter
Well-Known Member
it will have to be crimped for sure
cohunt
Well-Known Member
If you pull bullets from a straightwall case you need to re-size then re-bell the case mouths to seat the new bullets then seat and factory taper crimp or roll crimp depending on what cartridge you are loading for
Crimp everything, Just Saying
FireFlyFishing
Well-Known Member
Varmint Hunter
Well-Known Member
This ^^^^^^^^^^^
Yes, I size after pulling bullets. Whether to crimp or not depends in the cartridge/rifle. Repeaters(ie levers) with heavy loads are generally crimped. No crimps for my single shots(Shilo Sharps).
Sure miss this guy on the forum!! He was always straight on with no BS, always willing to help
Similar threads
Recent Posts
-
-
-
Best Recommended 223 Suppressor- Latest: FireFlyFishing
-
Mid-Weight 7mm Mono's for Elk Inside 500yds
- Latest: AussieWriter
-