These are not prefit barrels. These are blanks and you would need a Smith to chamber and thread the barrel for your action.
-
You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.
We offer multiple options to become a Supporting Member here.
-
Do not use PayPal Friend and Family, or any way that is not trackable (money orders, etc). Sellers, include the fee, and buyers don't do business with someone emails you off the site.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
For Sale Benchmark carbons on sale. Huge selection
- Thread starter rpierce
- Start date
Help Support Long Range Hunting Forum
rpierce
Official LRH Sponsor
They need chambered by a competent rifle builder.
PapaSmurf22
Member
That's what I figured! Thanks for the clarification. If you get a chance, can you shoot me a picture & weight of that 6.5mm 20"?
PapaSmurf22
Member
Any recommendations? Unfortunately don't have any smiths immediately around.
rpierce
Official LRH Sponsor
3 lbs 1 oz without any machining done to it or the extra length of the stub on the end cut off.
Attachments
PapaSmurf22
Member
Thanks! And last question(s) 1. What's the muzzle diameter? 2. This barrel would work with my Tikka 6.5prc just need a smith to get it chambered, crowned, and threaded?
Last edited:
rpierce
Official LRH Sponsor
Muzzle diameter is .885". Alot of builders will face the tikka actions off a bit so a 1.200 shank barrel will work on them. I know Jeremy Laier at Laiers Customs does quite a bit of work on tikkas. Great dude.
Quicksilver338
Well-Known Member
Ryan is right, and I've done that on 2 of my tikka actions for this exact reason. The face of the tikka actions will contour down, but there are no threads on that part so has no affect on the strength of the action. In fact with a larger contact area for the battle to mate up against will only benefit it. Tikka tennon size for barrels is typically 1.130", but the 1.200" is more of an industry standard and opens up a lot more available access to suppliers' inventory down the road.
The downside to this is, you can never run a prefit barrel on that action though. You will get much better results from a good smith doing a custom chambering job, but for most people a prefit works just fine for their needs as well.
