-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Anyone ever see a barrel like this?
- Thread starter mark slavinski
- Start date
Help Support Long Range Hunting Forum
They call that in the rough
Or Rough finish.
It can be finished the way you want.
Or Rough finish.
It can be finished the way you want.
mark slavinski
Well-Known Member
This was on a rifle, so the manufacturer of the barrel just never finished/ turned the outside of it?
Never seen one on a manufacturer rifle.
I've bought them that way from barrel manufacturer, had them fluted and then used my bench grinder with wire wheels to clean them up. Or my gunsmith took aluminum oxide sand paper and polished on his lathe.
Hard rock
Well-Known Member
Never have seen a barrel in the rough look like that , the finish looks intentional to me , kind pretty in a weird way , but I could be wrong . Interesting
mark slavinski
Well-Known Member
It's on a rifle I was looking at
Sdvldog1371
Well-Known Member
Never seen a finish like that. It looks like there was rust and someone may have used a die grinder and sanding disk around the circumference. Then some rough grit emery with an elongated twisting motion in an attempt to get rid of the swirls left by the grinder, followed by a heavy pass through a wire wheel on a bench grinder. Whether intentional for aesthetics or to remove some deep rust, there was some work put into it to get there, wouldn't call that a rough blank type of finish.
TonyRumore
Well-Known Member
Lol. That looks like a mistake.
Tony
Tony
mark slavinski
Well-Known Member
It really intrigues me! I really like it, it's different. Just can't figure out WTH it is!
tomcat818
Well-Known Member
Maybe some kind of acid etching...???
