Have a few dashers. Comp guns use varget 450s and 105 hybrids around .030 off and 2900. Coyote gun is 65 vmax 80 eldvt. All crazy accurate and fun to shoot. No recoil. Good luck!
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
6 BR/6 BR-A Reloaders “Sound Off”!!!
- Thread starter Deputy819
- Start date
Help Support Long Range Hunting Forum
A friend of mine only uses H4350 in his dasher competition gun with 105 Berger's.
I went a different route and built a 23" long barrel dasher. Shoots 103 eldx and 105 hvld very good with varget or H4350. Just got some 75 gr HHT, but haven't had time to develop a load yet. Was going to start with benchmark.
I went a different route and built a 23" long barrel dasher. Shoots 103 eldx and 105 hvld very good with varget or H4350. Just got some 75 gr HHT, but haven't had time to develop a load yet. Was going to start with benchmark.
matt_3479
Well-Known Member
I have a 22bra, 6br and a 6bra. The BRA's are awesome. Be careful with 8208, if runs HOT so back the charge down and work up carefully. I did a side by side comparison with 8208, n140, n150 and varget in my 22bra and 85.5's and was shocked how fast the 8208 was. All showed great promise but the 8208 was the only one that was significantly faster and couldn't run it up as high of a charge.
29.5gr of n140 and 30gr of varget were my fireforming loads and they absolutely were tac driving loads.
29.5gr of n140 and 30gr of varget were my fireforming loads and they absolutely were tac driving loads.
Deputy819
Well-Known Member
Another good thread comparing 6 BR to 6 BRA that also went into a Dasher comparison.
DLJ6
Well-Known Member
If you ever want to run lighter pills in the 80grn range I had good luck with RL-10x out of my 6BR.
For a couple different powders - RL 15.5 and H4895 have worked well for me. In the 6 Dasher, H4350 shot good but I ran out of space vs. others for speed. Never tried it in 6 BRA.
H4895 seems impossible to find last few years. RL15.5 and RL 16 plus the other Reloader line being phased out or production paused?
A friend hooked me up on H4895. The RL16, it has recently been available a few places. As for RL15.5 Blue Collar has plenty of it:
Alliant Reloder TS 15.5 Smokless Powder
Handload heavy bullets with better precision than ever before. New Alliant Powder® Reloder® TS 15.5 delivers all of the proven performance for which the Reloader family of powders is known, with superior temperature stability. The result is extremely consistent velocities across the temperature...
www.bluecollarreloading.com
Buzzsaw
Well-Known Member
105gr Berger Hybrid Targets
Be prepared to having a great time shooting the 6BR/variants....easy to shoot and tune. I've shot out a couple barrels in each the 6br,6BRA and 6Dasher.....they all shoot great with Varget/H4895/N150/N140 with CCI450'S/BR4/Wolf small magnums....tried H4350 in the Dasher it was too slow for me....I would advise getting a drop tube if you go that route.
Sealesniper
Well-Known Member
I have had 2 6BR's and both were amazingly accurate. I Should still have my loading data if you need it. It was a great round, but then the 6x47 lapua caught my eye, got 2 of them built and sold the 6BR's.
Deputy819
Well-Known Member
I currently only have @ 6 lbs of H4895 and I'm really trying to save it for my SML…..which burns 103.5gr of it every time I pull the trigger.
I'm hoping H4350 will work for me with the Berger 108's. If not I've got a TON of 8208 XBR and Varget seems plentiful these days. I got an 8" drop tube and aluminum powder funnel from PMA Tool specifically for this application.
Deputy819
Well-Known Member
I just may give you a shout on that. I've read that I can run the BR "high nodes" in the BR-A and the brass won't complain at all.
Mine shot really good right at 3000fps with a Berger 105hy.....Shot one of the smaller five shot groups I've ever shot with it at 600yrds.
