• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Bark River Knife

KTP

Well-Known Member
Joined
Nov 19, 2012
Messages
813
Location
Ohio
Classic Drop Point Hunter in Magnacut Steel. In original box, new unused. 3 1/2" blade 8" overall.
Green canvas with red liners. Lanyard hole and unused sheath.
$240 shipped lower 48
 

Attachments

  • IMG_0305.jpeg
    IMG_0305.jpeg
    435.7 KB · Views: 175
  • IMG_0308.jpeg
    IMG_0308.jpeg
    342.7 KB · Views: 171
  • IMG_0307.jpeg
    IMG_0307.jpeg
    623.2 KB · Views: 135
  • IMG_0306.jpeg
    IMG_0306.jpeg
    377.6 KB · Views: 126
  • IMG_0309.jpeg
    IMG_0309.jpeg
    395.4 KB · Views: 123
  • IMG_0310.jpeg
    IMG_0310.jpeg
    448.1 KB · Views: 169
Magnacut is GREAT knife steel. (yes, I am a knife nerd/addict)

Hardness is on par with S125, slightly lower than S90V and S110V, but above S30V and S35VN/S45VN, so not bad, but not easy to re-sharpen. It resists bending very well.
Toughness is well beyond S35VN, so it is a great choice for a hard used knife. Very resistant to chipping or breaking. Hardness and toughness usually don't go together. Magnacut has bridged this gap well.
Edge retention is in the realm of S35VN, S30V, S45V area, which is a great compromise for keeping an edge like S90V, and resharpening like S30V to scapel sharp.
Corrosion resistance is way up there, better than S110VN and M390 and just below Vanex, so if you have to skin an Alien, that acid won't hurt this steel.
Rockwell is in the 61-64 range.
 
Magnacut is GREAT knife steel. (yes, I am a knife nerd/addict)

Hardness is on par with S125, slightly lower than S90V and S110V, but above S30V and S35VN/S45VN, so not bad, but not easy to re-sharpen. It resists bending very well.
Toughness is well beyond S35VN, so it is a great choice for a hard used knife. Very resistant to chipping or breaking. Hardness and toughness usually don't go together. Magnacut has bridged this gap well.
Edge retention is in the realm of S35VN, S30V, S45V area, which is a great compromise for keeping an edge like S90V, and resharpening like S30V to scapel sharp.
Corrosion resistance is way up there, better than S110VN and M390 and just below Vanex, so if you have to skin an Alien, that acid won't hurt this steel.
Rockwell is in the 61-64 range.
Last alien I skinned really etched my blade…thanks for letting me know 😂. Free bump
 
Top