Gas Gun Seating Depth

Eric H said:
Currently doing development for a 6MM Predator/Grendel. Looked in Hodgdon load data but nothing for the bullet I'm running. Loaded it to MAG length and went for it. I was already over max pressure when I found a fairly decent group but wanted it closer so started going away from the L/G and groups got better. There was a tradeoff where the further from L/G the.slower the round. Currently at a comfortable .369MOA in 2700'
Click to expand...

Bigwilly556 said:
As previously stated 6 arc is very particular depending on bullet selection. Long heavy will be seated mag length or close to it with some 58-95s will need to be seated much shorter. These weights may be heavily jammed at 2.60. I just finished load development for berger 95 classic hunters in my proof research 6 arc barrel 2.17 OAL was .020 off. I ran some 95 SMK blems to break the barrel in and loaded them @ 2.60 mag length with .030 jump. With my proof 6 arc barrel and the bergers I treated it much like a bolt gun.
Click to expand...
Thanks, I may be using 90 gn Sierra TGK's. Right now I'm playing with 105 Barnes match burners, but they are very inconsistent in weight and length
 
Veteran said:
All, mechanical and combustion systems have harmonics. The gas gun also has sonic and pressure waves.

It all relates to bullet exit timing and where the tip of the barrel is pointing at bullet exit at the muzzle.

Bullet seating affects both the burn rate, pressure, and therefore bullet exit timing.

So yes, bullet seating can still be a thing on an AR regardless of whether it is gas or mechanically operated.
Click to expand...
Thanks, I thought the same thing since all barrels have whip/harmonics.
 
I've played around with seating depth mainly on my 6 ARC and 6.5 Grendel gas guns. Honestly, I did not get vastly different t results so I just started going COL listed in the manuals or within .005" of it for .223/5.56 and mag length for 6 ARC and 6.5 Grendel. I chose mag length for the ARC and Grendel, as I only have two brand of mags for them, but numerous different ones for the .223/5.56 ones.
 
Mag length is the restriction here. I still check to see how far off the lands I am. If I can start at .020" off and still fit in the mag, great. If not, I'll just load to mag length and call it good.

Haven't loaded a ton for my 6 ARC yet (AR) since it shoots the factory 108 ELDM ammo extremely well.
 
waspocrew said:
Mag length is the restriction here. I still check to see how far off the lands I am. If I can start at .020" off and still fit in the mag, great. If not, I'll just load to mag length and call it good.

Haven't loaded a ton for my 6 ARC yet (AR) since it shoots the factory 108 ELDM ammo extremely well.
Click to expand...
Thanks!
 

Similar threads

BlazerBeam
What seating depth? Seating depth test
Replies
6
Views
1K
azsugarbear
A
S
Seating Depth
2 3 4
Replies
48
Views
5K
smokey3
smokey3
T
Seating depth
2
Replies
17
Views
3K
remingtonman_25_06
remingtonman_25_06
foul bore
seating depth
Replies
11
Views
2K
ronstone09
R
hammer111
Seating depth
Replies
6
Views
880
L.Sherm
L

Recent Posts

Top