Hawkins Hunter DBM Spacer Kits

Kmccord

Kmccord

Well-Known Member
Joined
Nov 30, 2016
Messages
1,622
Location
Reilly Springs, TX
I am looking to build a 6.5 PRC and 300 PRC in a Terminus Zeus quick change barrel, to run the 6.5, Hawkins makes a Hunter DBM Spacer Kits to run in the LA Hunter mag. I figured if this works as designed, I could have two rifles in one. I wanted to see if anyone has used this spacer kit and did it work as designed?
 
I've built both 300 and 6.5 prc's on Kelbly Atlas Tactical long actions using Hawkins Hunter bottom metal and mags. The 6.5 prc fed fine out 300 mag without any spacer kit. 6.5 was loaded with 156gr Bergers with an OAL length of 3.1
 
The spacer kit works very well. We are using them in both magnum and standard bolt face LA Hawkins Hunter mags. Flawlessly running 6.5 PRC and 25 CM in LA flush Hunter mags. Removing the extra space from the mag and shifting the spring forward is a big improvement. This Hawkins setup is really a great option for reliably running SA cartridges in a LA.
 
JTB said:
The spacer kit works very well. We are using them in both magnum and standard bolt face LA Hawkins Hunter mags. Flawlessly running 6.5 PRC and 25 CM in LA flush Hunter mags. Removing the extra space from the mag and shifting the spring forward is a big improvement. This Hawkins setup is really a great option for reliably running SA cartridges in a LA.
Click to expand...
Thank you for the feedback, I have been thinking of doing a 6mm Creedmoor as well in the LA and offer it with a 6.5-284 barrel as a switch barrel as well, go from hunting varmints to switch out for Deer as well or anything that is using a standard bolt face. I will be doing it for the PRC switch barrels.
 
Kmccord said:
Thank you for the feedback, I have been thinking of doing a 6mm Creedmoor as well in the LA and offer it with a 6.5-284 barrel as a switch barrel as well, go from hunting varmints to switch out for Deer as well or anything that is using a standard bolt face. I will be doing it for the PRC switch barrels.
Click to expand...
Did you ever end up running a 6cm in a LA?
 
KTWebb said:
Did you ever end up running a 6cm in a LA?
Click to expand...
No, not yet, but I will be doing so in the very near future. I will do it with a 6.5 PRC, I built two rifles this year, both in SA, 6 Creed and 6.5 PRC, I will not do another PRC in a SA. The creed worked fine to touch the Lands in a SA with a Wyatt mag in BDL, but the PRC would not.
 
Wanting to build a 6CM, but use a LA Origin I have on hand. Some say it'll run, others say it won't. Hoping either the Accurate Mag 308 LA magazine or the Hawkins Hunter LA with spacer kit would work for me.
 
KTWebb said:
Wanting to build a 6CM, but use a LA Origin I have on hand. Some say it'll run, others say it won't. Hoping either the Accurate Mag 308 LA magazine or the Hawkins Hunter LA with spacer kit would work for me.
Click to expand...
The Hawkins LA spacer kit should work, if you have any questions about it, contact Hawkins and see what they tell you. At least you would hear it straight from them.
 

Similar threads

Buck 300
Hawkins Hunter DBM
Replies
2
Views
423
brianacnp
B
C
APA RTG DBM VS Hawkins Hunter DBM
Replies
2
Views
509
Kimber7man
Kimber7man
J
Hawkins m5 dbm
Replies
6
Views
2K
Joefrazell
J
HawkinsPrecision
Hawkins Precision Long Action Hunter DBM and Flush Magazine
Replies
2
Views
931
Painless300
P
HawkinsPrecision
New Hawkins Precision Hunter DBM
2
Replies
23
Views
9K
ormandj
O

Recent Posts

Top