• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

For Sale 💥6.5 PRC rifle💥

Mnovak73

Well-Known Member
Joined
Feb 22, 2018
Messages
565
Location
Arkansas
Hello,
I have for sale a semi custom 6.5 PRC build that is a shooter! The only reason I'm selling this is I have a new rifle being built and plan to sell this to help fund the new one.
Components,
🔺Trued Remington 700 action, fluted bolt w m16 style extractor. 20 MOA rail.
🔺Proof 22" 1-8 barrel w/ brake
🔺Terminus bottom metal
🔺Timney elite hunter trigger set at 1.5lbs
🔺carbon fiber stock, unsure of manufacture but I think McMillan.
🔺 Weight should be sub 7lbs without optics, I do not have a good scale to weight it.
🔺Scope is a Huskemaw Blue Diamond 5-20x50 w/ custom turret set for current load. Sits in Seekins precision rings.

Gun and scope have handling marks etc but nothing significant, this has been my primary go to hunting rifle. Round count is well under 200, I have shot factory Hornady precision ammunition and it shot well, sub 1/2" MOA. I used hand loads and will share load data I used with buyer. I attached target pics. I zeroed the gun at 200 yds. The 3 shot pic is a 200 yd target, I did adjust right to center. The other pics are of targets I shot after zeroed, 1 shot each with a fouled barrel on each and the barrel at ambient temperature for each shot. If you have any questions please ask.

I would like to sell the package for $2850 plus shipping. Make sure your FFL accepts shipments from individuals.
I will split this up $1900 for rifle $950 for scope in the rings. I will not sell the scope until the rifle sells.
I accept Venmo or certified funds.

Gun will be posted on other sites as well.
 

Attachments

  • IMG_2926.jpeg
    IMG_2926.jpeg
    161.7 KB · Views: 294
  • IMG_2933.jpeg
    IMG_2933.jpeg
    164.6 KB · Views: 279
  • IMG_2929.jpeg
    IMG_2929.jpeg
    289.7 KB · Views: 275
  • IMG_2936.jpeg
    IMG_2936.jpeg
    2.2 MB · Views: 267
  • IMG_2938.jpeg
    IMG_2938.jpeg
    1 MB · Views: 256
  • IMG_2939.jpeg
    IMG_2939.jpeg
    1.1 MB · Views: 243
  • IMG_2940.jpeg
    IMG_2940.jpeg
    1.2 MB · Views: 293
Nice gun who did the work .
I bought the rifle about 4 years ago from a member on here, Muley Madness. He built the rifle.
When I originally purchased the rifle it had the standard hinged floor plate. I sent the rifle to LRI to have the Terminus bottom metal installed. They also talked me into adding the m16 style extractor.
 
Top