Deputy819
Well-Known Member
I use Benchmark, IMR 8208 XBR (both of which are available right now) and H4895…..which seems more like a myth at present time.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Smokeless muzzleloader barrel?
- Thread starter joko111
- Start date
Help Support Long Range Hunting Forum
ENCORE
Well-Known Member
IMR8208XBR I would have to say is my favorite. H4895 for heavy bullets is outstanding. I shoot Benchmark, but I prefer the 8208 over it.
Ken Ipheilya Tahtahs
Member
Why not & bc I can, about sums that up.Care to explain to us as to why?
Last edited:
Deputy819
Well-Known Member
My question was an honest one hoping to gain some more knowledge, but if "Why not & bc I can, about sums that up" is the best you can do then I'll look for knowledge elsewhere.
I'm gonna be that guy. I've been living under a rock and didn't know you can do this. Where do I find the info on this smokeless ML business
T
Pva Is who I used, I ordered a brux blank from Hankins precision and a breaching from arrowhead, sent it all off to pva for the smith work, I'm very pleased!
Deputy819
Well-Known Member
Home | Hank's Message Board
Visit our forum at: hanksmessageboard.freeforums.net
Here's a great place to start! Oh, and by the way…welcome to the smokeless rabbit hole!
Yeah it's badHome | Hank's Message Board
Visit our forum at: hanksmessageboard.freeforums.nethanksmessageboard.freeforums.net
Here's a great place to start! Oh, and by the way…welcome to the smokeless rabbit hole!
View attachment 609272
the rabbit hole is deepKen Ipheilya Tahtahs
Member
And though I'm known for my wit & sarcasm, my reply was simply to the point. It too was an honest answer.My question was an honest one hoping to gain some more knowledge, but if "Why not & bc I can, about sums that up" is the best you can do then I'll look for knowledge elsewhere.
I had been shooting a lot with a 1:22 & some with a 1:20 & some with a 1:18 with bullets from 200g to 325g. I had the op to get a good deal on a 1:16 barrel with a #17 contour & the opportunity to do a bunch of bullet & load testing in a twist rate that fast was too exciting to pass up. Hence my orig comment. I only know of 2 guys that have 1:16 twist .45 SML's, until I read this guys post having one.
Thus far I've shot some 250g FTX, 300g SST, 270g NPpp & Fury ST2P 275 & 300g bullets & they've all shot pretty decent to excellent out to 200yds. I do have other bullets here to test as well, but haven't shot them yet. I don't have the budget for Pittman or Parker bullets & though I'm certainly looking for match accuracy out of this gun, I'm not competing with it.
So, there ya go, the whole ball of wax, minus the abrupt sarcasm.
ENCORE
Well-Known Member
DEEP????? Tell the truth........ there's no bottom to it at allYeah it's bad
Just a hint......... Unless your state has a minimum cal. requirement, I'd consider a 40cal 1:14 twist maximum over the 45's regardless of twist. Yeah, I know, there's more available for the 45's, but the 40's did to the 45's, what the 45's did to the 50's.
Ken Ipheilya Tahtahs
Member
All 3 rigs look very nice.All 3 of my Smokeless Muzzys are running 1-20 barrels. I shoot 275 gr. bullets from the Encore and Rem 700 and 300 gr. from the Arrowhead Obsidian.
6.5x300 WBY
Well-Known Member
Just DON'T. I don't need more pressure to build a .40 for goodness sake. The pull is strong.DEEP????? Tell the truth........ there's no bottom to it at all
Just a hint......... Unless your state has a minimum cal. requirement, I'd consider a 40cal 1:14 twist maximum over the 45's regardless of twist. Yeah, I know, there's more available for the 45's, but the 40's did to the 45's, what the 45's did to the 50's.
ENCORE
Well-Known Member
I'm doing everything I possibly can to not have one built. Those 40's are unbelievable.Just DON'T. I don't need more pressure to build a .40 for goodness sake. The pull is strong.
Deputy819
Well-Known Member
Just DON'T. I don't need more pressure to build a .40 for goodness sake. The pull is strong.
