Christensen Arms Receiver/Action threads

muleyman · Feb 4, 2021

Does anyone happen to know what pitch and/or pattern Christensen uses for their receiver threads for barrels? I know their actions are a Rem 700 clone but I couldn't find that specific info either on Google or searching here. I've emailed them directly but haven't gotten a reply....thanks

muleyman · Feb 4, 2021

Well ironically I just heard back from Christensen so in case anyone else is looking, they use the standard Rem 700 thread pattern....thanks

601handryan · Oct 13, 2021

muleyman said:
Well ironically I just heard back from Christensen so in case anyone else is looking, they use the standard Rem 700 thread pattern....thanks

Assuming you're doing a barrel swap. I'm considering the same thing but going to a prefit shouldered proof research and was looking for this information.

Runolfson · Nov 26, 2021

either of you guys do a barrel swap? How did it go? I have a Mesa and want to do a barrel swap. Would appreciate getting the details of what you did.
Thanks

Earnhardt · Feb 5, 2022

Are the Christensen Arms actions a standard Rem 700 thread of 1.06" x 16 TPI?
Thanks

kaseyfied · Feb 6, 2022

Earnhardt said:
Are the Christensen Arms actions a standard Rem 700 thread of 1.06" x 16 TPI?
Thanks

Yes standard rem threads... barrel swaps are easy

Kasey

Earnhardt · Feb 6, 2022

kaseyfied said:
Yes standard rem threads... barrel swaps are easy

Kasey

I should have asked this also...
How about the bolt face/bolt head...is it a standard recessed bolt head like the Rem 700?
Or is it s coned bolt face/bolt head?
Thanks

kaseyfied · Feb 6, 2022

700 footprint

Roughrice · Oct 5, 2024

Reviving an old thread.

Will a Christensen Arms barrel screw up on a Remington 700 and be relatively close enough in headspace to be corrected with recoil lug thickness?
I mean like within +\- .005…
Please share your experiences…. From what's been done please. Not what you heard or read somewhere.

Thanks ahead.

atblis · Oct 9, 2024

I put a Ridgeline barrel on a 700 and it head-spaced correctly with a normal thickness lug. I forget the exact lug thicknesses but it was pretty much a stock Remington thickness.

Christensen Arms Receiver/Action threads

muleyman

Well-Known Member

muleyman

Well-Known Member

601handryan

Well-Known Member

Runolfson

New Member

Earnhardt

Well-Known Member

kaseyfied

Well-Known Member

Earnhardt

Well-Known Member

kaseyfied

Well-Known Member

Roughrice

Well-Known Member

atblis

Well-Known Member

Similar threads

Recent Posts