The mirrors allow you to place 100% of the hit indicator behind the face.of the steel. That way if a shot actually hits the area where the indicator lights would have been, it wrecks the (consumable) mirror instead.of the actual hit indicator
I need to test mine with the magnet to see if they hold. I added the lip to keep it in position off of the plate (to prevent sliding). Most likely it will work best on the top edge. If the magnet doesnt hold then will probably have to either get a new velcro backing or pull the velcro from the back and put it on the front. I may shorten the mirrored part to be the same length as the led array. Assuming everything works I will make 1 batch at $12 + shipping which will include the magnet. Seem fair?
I need to test mine with the magnet to see if they hold. I added the lip to keep it in position off of the plate (to prevent sliding). Most likely it will work best on the top edge. If the magnet doesnt hold then will probably have to either get a new velcro backing or pull the velcro from the back and put it on the front. I may shorten the mirrored part to be the same length as the led array. Assuming everything works I will make 1 batch at $12 + shipping which will include the magnet. Seem fair?View attachment 545126View attachment 545127
I'll be interested to see if the magnet interferes with the trigger mechanism. $12 plus shipping will be getting close to the price of a replacement unit. Not saying your price is out of line, just something to consider.
Bullet actually hitting the unit I believe. I have seen multiple people complain about this. The good news is I believe the unit is wired properly (not like 2 strand Christmas lights) so if one or more (up to 1/3) are damaged the other lights still work
I'll be interested to see if the magnet interferes with the trigger mechanism. $12 plus shipping will be getting close to the price of a replacement unit. Not saying your price is out of line, just something to consider.
Excellent thought (does magnet interfere w accelerometer). Test (vid link below) shows it does not (at least with the magnet in the center). My print time is approx 1 hour (cura shows it incorrectly for my printer). Assembly is about 10 mins. I do NOT want to be in the business of making these - I am just offering 1 run as a courtesy to the people here.
Basically;
1. just cut the mirror with scissors in 1/2" x 66mm strips.
2. Remove the backing and protectors.
3. run a bead of hot glue down the center of the back of the mirror strips
4. use tweezers to place the mirror strips on the 2 slanted sections
I may need to make an alternate version for t-post holders that angle the plate down (the current version is for hangers) - let me know if you need one
Attachments
FlashBang_v9.stl.zip
4.1 KB
· Views: 74
Last edited:
As an Amazon Associate we earn from qualifying purchases.
I have not actually hit mine yet, I just assumed that would be the advantage of mirrors. I don't think bullet splatter could harm the LEDs from.the typical angle that.they are placed as the are actually flush with the back of the plate. Unless you actually hit the very edge of the target.
I'll be interested to see if the magnet interferes with the trigger mechanism. $12 plus shipping will be getting close to the price of a replacement unit. Not saying your price is out of line, just something to consider.
I tried to install mine with a magnet instead of putting velcro on targets I didn't own but they wouldn't trigger. Seems the magnet was holding the accelerometer from accelerating
I tried to install mine with a magnet instead of putting velcro on targets I didn't own but they wouldn't trigger. Seems the magnet was holding the accelerometer from accelerating
@biednick The Magnetospeed version is also $200 where the Caldwell is only $30 list. The 3d printed version of the reflector just slides on and can be replaced if broken. Pics are of my version (waiting for the plastic mirror strips to come in from Amazon)View attachment 544251View attachment 544252
@biednick The Magnetospeed version is also $200 where the Caldwell is only $30 list. The 3d printed version of the reflector just slides on and can be replaced if broken. Pics are of my version (waiting for the plastic mirror strips to come in from Amazon)View attachment 544251View attachment 544252