• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED HCA .308 Win barrel/barreled action Mausingfield M7 *Reduced*

CjC73

Well-Known Member
Joined
Jan 21, 2018
Messages
2,523
Location
SE Mich
- 20" HCA carbon wrapped barrel
- Heavy hunter contour
- 9,5 twist
- .308 Win chamber (only 50 rounds maybe); chambered by SJA
- threaded 1/2-28 with a self-timing Ross Schuler brake with top ports (23" from recoil lug to end of brake)
- Currently on a Mausingfield M7 action


Also have lots of reloading dies and a bunch of loaded ammo (handloads that I've shot and would sell for components, powder and bullet known)

Sell barrel for: $665 $615 tyd

barreled action (no trigger) can be had for ---- $1825 to your ffl


20240913_140758.jpg20240913_140811.jpg20240913_140837.jpg



Dies: $120 tyd (buyer of barrel has first crack)
20240913_141603.jpg

Ammo: $250 plus shipping (less than $0.40/round)
- 554 rounds loaded with 165gr HPBT GK and Win760
-100 rounds loaded with 165gr SBT GK and Win760
- bunch of empty once fired brass (not shown, will get count later if important)
20240913_185829.jpg
 
Last edited:
barreled action (no trigger) can be had for ---- $1850 to your ffl
 
barrel reduced.

anyone interested in the ammo? over 4# of powder to be had plus a lot of bullets AND primed brass!
 
Why are you selling this rifle? Is this the only barrel you've mounted to it? The barrel is a Savage small shank but with a shoulder and no barrel nut, correct? Are the .308 dies duplicative, or is each one unique? I'm interested in the barreled action... are you looking for a trade (rifle, shotgun, etc.)? I have $$ also.
 
@ObiJohn
just narrowing down a little. I bought the action slightly used and do not know how many barrels the previous owner had on it. This is the only one I had installed. Correct, I believe they share the same threads as savage, and yes, this is shouldered. There might be a die or two that are duplicate but there's a FL sizer, a neck sizer, a bushing sizer, trim die, and a couple seating dies.

Possible on trades, send me what you have in mind.
 
I have a new in box Kimber 84 with walnut stock, in .308. I also have a new in box Kimber K22 SVT .22 LR (the 18" version with the 18" target barrel and laminated varmint/target stock). Other stuff as well (former Kimber dealer) plus an Ithaca/SKB 280E 20ga, a Remington 700 Etronix NIB with ammo AND a new Remington factory stainless bolt and standard trigger if you want a conventional 700 action (the bolt would need to be headspaced to the barrel).

Could you PM me some photos of the action and describe the condition? I assume it has the 0.473" bolt head and extractor, do you have other bolt heads/extractors? Any bottom metal?
 
I have a new in box Kimber 84 with walnut stock, in .308. I also have a new in box Kimber K22 SVT .22 LR (the 18" version with the 18" target barrel and laminated varmint/target stock). Other stuff as well (former Kimber dealer) plus an Ithaca/SKB 280E 20ga, a Remington 700 Etronix NIB with ammo AND a new Remington factory stainless bolt and standard trigger if you want a conventional 700 action (the bolt would need to be headspaced to the barrel).

Could you PM me some photos of the action and describe the condition? I assume it has the 0.473" bolt head and extractor, do you have other bolt heads/extractors? Any bottom metal?
@ObiJohn

See pics above, if you want a specific angle, just let me know. Condition is excellent. yes it's a .473 bolt head. I do not have any other bolt heads at this time.

No bottom metal, my stock is a manners with built in mini chassis that didn't need a bottom metal.
 
Top