Cutting edge bullets, Maximus

jasent

Well-Known Member
Joined
Nov 16, 2010
Messages
806
Location
deer park, wa 99006
Just picked up some for my 243. Wondering if anyone here has experience with this line of bullets and how they liked em.
 

Attachments

  • IMG_0153.jpeg
    IMG_0153.jpeg
    233.6 KB · Views: 77
Just picked up some for my 243. Wondering if anyone here has experience with this line of bullets and how they liked em.
I use the

.224 60gr ER (Extended Range) Raptor - 50ct

. They are Devastating!
Cutting Edge 60gr ER Raptor
BC 0.265 length: 0.988, tip: 0.160
1.75
CCI #41
UAE Tracer
25.0gr
1.950" jump=[0.029']
2.334"
3212: SD: 13.6
0.355" [3 shot]
12/22/2022
 
Just picked up some for my 243. Wondering if anyone here has experience with this line of bullets and how they liked em.
I use the

.224 60gr ER (Extended Range) Raptor - 50ct

. They are Devastating!
 
I became frustrated with Barnes so tried Cutting Edge. I have had tremendous results with Cutting Edge and being from CA don't see a need for changing
Since you're comparing monolithic bullets, have you ever tried Hammer Bullets? I was just curious how they compared to the others in your experience.
 
I have not tried Hammer. I started using Cutting Edge before Hammer existed or at least before I knew about them. I think Hammer pretty much copied Cutting Edge. Cutting Edge was/is popular with competition shooters and they were recommended by a high profile rifle builder to me so that's how I got started and so far I have no regrets. Nothing against Hammer and they are pretty active on this site but I just have no need to change something up that works so well.
 
I have no experience with the Maximus line but I have shot many MTH and now shoot the 145 Lazers in my 7 Rum. I get better than normal velocity and higher bc's than advertised. Accuracy is decent to good and I like the terminal performance better than most other coppers, however limited on kills. I need more test subjects. That 77grn Maximus is smokin.... I bet it hits pretty hard! Happy shooting, Jason
 
I have not tried Hammer. I started using Cutting Edge before Hammer existed or at least before I knew about them. I think Hammer pretty much copied Cutting Edge. Cutting Edge was/is popular with competition shooters and they were recommended by a high profile rifle builder to me so that's how I got started and so far I have no regrets. Nothing against Hammer and they are pretty active on this site but I just have no need to change something up that works so well.
Thanks.
 

Recent Posts

Top