Contender/SSK-5 Hanger System

K

K9TXS

Well-Known Member
Joined
Nov 4, 2014
Messages
371
Location
Clarksville, TN
Anyone use a forearm hanger on their Contender/SSK-50? I've read where some shooters that do use it feel it makes the platform a little more accurate? With the hanger, the forearm attaches with on bolt instead of two.

I'm in the process of making up an aluminum forearm for my SSK-50 and may using a hanger on it.

Here is a good read on the hanger bar: LINK
 

Attachments

  • Screen Shot 2024-09-17 at 10.19.51 AM.png
    Screen Shot 2024-09-17 at 10.19.51 AM.png
    437.2 KB · Views: 51
Last edited:
I have not noticed any appreciable difference in accuracy between my hanger bar barrels and my other barrels. However I free float and pillar bed the majority of my barrels/ Forends.

I would think if you are milling your own aluminum forend, you could mill it to free float the barrel just making contact at the screw studs.
 
I can't see how any of the bedding/mounting methods would be better than any other. No matter what you do it's not going to be floated.

I have went back to forends mounted right on the barrel without bedding and don't really see a difference.
 
I prefer minimum contact. I have not, and will not perform any scientific tests to see if there are differences. BUT I always felt like every move I made, whether that, trigger improvements, rests, target types, or load experiments helped me improve overall shooting accuracy.

On a factory forend, composite especially, something as simple as a couple small ss washers provide the clearance I wanted. I do have some hanger bars, and pillars as well.
 
I have hanger bars on All of mine. Not sure it helps but I like it. I have a dedicated frame for every barrel so just because it works for me doesn't mean it will work for you. LOL
Safe shooting
Doug
 
I never noticed any accuracy differences in forearm attachment options on my encores or g2 tenders. That being said my friend the late Ray Prager/ old fart did have a great forearm design with very minimal contact. I have a couple but haven't tested them yet.
 
I concur with Chris that you can't truly free float a TC barrel. But you can standardize the pressure points. Like Kyode and Doug, dedicated frames, barrels, furniture and I don't know which or care which modification makes the difference as long as I get the results I expect out of any given setup. I just like or dislike to know that it's the nut behind the trigger that is at fault.
 
Some of mine have hangar bars and some don't. At one time Bullberry would only guarantee the accuracy of their barrels if you used their hanger bar. I think Fred might have believed in them, or at least the $ they added to the sale ;) I have, at times used a small rubber O-ring around the forearm screws, no idea if it helped or not, I couldn't shoot the difference in any case!
 
K9TXS said:
Anyone use a forearm hanger on their Contender/SSK-50? I've read where some shooters that do use it feel it makes the platform a little more accurate? With the hanger, the forearm attaches with on bolt instead of two.

I'm in the process of making up an aluminum forearm for my SSK-50 and may using a hanger on it.

Here is a good read on the hanger bar: LINK
Click to expand...
I use a hanger on a pistol. I too float the rest of the stock etc for no contact points and have had no issue dialing in a load.
 
ChrisRhodes said:
Don Bower….the original long range handgun guy….bolted the wood forearms directly to the barrels….🤔
Click to expand...
Just think how much better he could of shot if he had the internet 😂

Seriously, the article on Don was why I got into contenders. Bought his whole shooting system from him, rest, modified grip, & forend. I think it set me back $110 bucks.
 
I have not done any testing, but I have always preferred to use the rubber forends from Pachmayr as I believe they provide some level of resonance dampening that was beneficial to accuracy. Can't prove that idea. I did also shoot some the wood forends as well as the hard plastic forends from T/C that shot good as well. I've never used a hanger bar, nor did I float the forend on any of my T/C's.
 

Similar threads

K
SSK-50 (Contender) - Odd Failure to Fire
2
Replies
22
Views
1K
mjshell
M
tred1956
New SSK-50 Flatside Contender Let's SEE Em
2
Replies
19
Views
3K
tred1956
tred1956
tred1956
SSK-50 Frames IN Stock Midway
Replies
1
Views
558
tred1956
tred1956
B
SSK 338-06 JDJ
Replies
1
Views
449
KYODE
KYODE
nksmfamjp
Contender Pressure
Replies
5
Views
808
nksmfamjp
nksmfamjp

Recent Posts

Top