-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
PT&G Valhalla Action
- Thread starter frostop
- Start date
Help Support Long Range Hunting Forum
sable tireur
Well-Known Member
- Joined
- Oct 8, 2010
- Messages
- 3,960
Just so we can all share in the sale prices, here is the link for the whole page of items:
https://pacifictoolandgauge.com/1197-sale-items
Enjoy!
https://pacifictoolandgauge.com/1197-sale-items
Enjoy!
We bought 3 receivers (one for me) to build 338NM. I chambered all 3 barrels. Our FFL guy sent the receivers to be Nitrided, barrels fluted, then Nitrided.
Melonited receivers ran smoothly.
The FFL guy finished his rifle with AI chassis, zeroed it with this group launching 300 grains SMK. Then, proceeded to run all the way to 1200 on steel eSilhouette. Confirmation on targets showed 1/2 MOA through 900. MOA the rest. Waterline maintained, wind did the damage.
With over 200 rounds now through the rifle, the action ran smoothly, no hiccups.
Edit: I chambered my barrel first. With the tenon and headspace dimensions from my barrel. I used my numbers to chamber the other two
When they brought their receivers, their barrels screwed right up, headspace go/no go checked out. Bottom line, the receivers are fairly close in their critical dimensions.
Maybe we just lucked out.
Whoever chambers the barrel they need to accommodate the M16 extractor clearance as it rides over the rim during chambering. People who chamber barrels already know this. Just throwing it out there.
Melonited receivers ran smoothly.
The FFL guy finished his rifle with AI chassis, zeroed it with this group launching 300 grains SMK. Then, proceeded to run all the way to 1200 on steel eSilhouette. Confirmation on targets showed 1/2 MOA through 900. MOA the rest. Waterline maintained, wind did the damage.
With over 200 rounds now through the rifle, the action ran smoothly, no hiccups.
Edit: I chambered my barrel first. With the tenon and headspace dimensions from my barrel. I used my numbers to chamber the other two
When they brought their receivers, their barrels screwed right up, headspace go/no go checked out. Bottom line, the receivers are fairly close in their critical dimensions.
Maybe we just lucked out.
Whoever chambers the barrel they need to accommodate the M16 extractor clearance as it rides over the rim during chambering. People who chamber barrels already know this. Just throwing it out there.
Last edited:
wwbrown
Well-Known Member
They look like Stiller actions, I guess Jerry sold Stiller so the company may have a different name. PT&G has had a relationship with Stiller as they used to make the bolts for many of their action and possibly still do.
I have some Stiller actions and never seen any faults and I would jump on these if I needed a custom Rem 700 form factor action as $750 is not much more than what I paid maybe 10 years ago.
I have some Stiller actions and never seen any faults and I would jump on these if I needed a custom Rem 700 form factor action as $750 is not much more than what I paid maybe 10 years ago.
I buy the bottom metals from red hawks
sable tireur
Well-Known Member
- Joined
- Oct 8, 2010
- Messages
- 3,960
