McGuire Ballistics 168 Copper Rose

Wedgy said:

Sponsors can post and plug their products.

Click to expand...

jdvangeystel said:

This isnt my product. I live in WA state, these bullets are manufactured in California. I am not paid by this company, nor do I own it

Click to expand...

Wedgy said:

Sponsors can post and plug their products.

Click to expand...

Wedgy said:

I think it is highly suspicious for a new members first ever post to be pushing/advertising a product.

Click to expand...

Pdvdh said:

I just spent some time researching these bullets. Not a lot of info available. Watched a couple YouTube videos from the company owner.

I've been hunting with copper mono bullets for the past 6-7 years. I'm interested. But I couldn't find much explanation on design, and virtually no customer/user feedback could be found. That doesn't mean they might not be a great bullet. Just looks like it will take some time to get the user feedback I prefer, prior to investing time and resources in a new line of bullets.

I don't do Facebook and the other online social media websites. So there might be more information to be found on some of those type platforms.

Click to expand...

McGuire Ballistics review

I had the pleasure to shoot these bullets last hunting season out of my 30 SM. I used the 195 with a .700 g1, which i did use during hunting season. Looks close to a .350 G7. Still need to go shoot that to confirm. What separates this mono from others is the tip. It looks like a solid copper...

www.longrangehunting.com

Ed AO said:

McGuire Ballistics review

I had the pleasure to shoot these bullets last hunting season out of my 30 SM. I used the 195 with a .700 g1, which i did use during hunting season. Looks close to a .350 G7. Still need to go shoot that to confirm. What separates this mono from others is the tip. It looks like a solid copper...

www.longrangehunting.com

Here is my post for the 195

Click to expand...

jdvangeystel said:

Pdvdh- I am trying to figure out how to shoot you a message so I can get you more info as well as the owners contact info for you- I cant seen to figure out how to send a private message- If you can message me and I can get you all the info youd want- fairly new to this forum. Thanks

Click to expand...

Pdvdh said:

You've got to have a minimum number of Posts on this Forum in order to qualify to send a message to other Forum members. I think it's like 10 posts. So you're almost there with your current 8 posts. I tried to send you a message but the option wasn't available. Post a couple more times and the messaging feature should become available to you.
Cheers

Click to expand...

Calvin45 said:

Even if it is someone affiliated with the company…We don't really have a problem with that do we? If we did hammer bullets would have to get the heck out of here (but I hope they don't )

Click to expand...

jdvangeystel said:

I want to start by saying that I have never been a copper bullet guy, I have always shot cup and core lead bullets and never really had any intentions of going away from that. Recently I came across these McGuire Ballistics Copper Rose bullets and I saw the great BC and they caught my attention. I just recently built a 7 SAUM on a long action with a 24' Proof Carbon Sendero 1:8 twist, and dropped it in a Mesa Precision carbon fiber stock. I was putting this build together for a light weight all around hunting rifle, and had intended to shoot 190 Berger Hybrids. I put 150 rounds through it and started working on load development, it was during this time that I found the Copper Rose bullets.

I contacted Sam at McGuire Ballistics and after a few messages back and forth I gave him a call and he gave me the run down on the bullets he was building. Just from talking to him and His attention to detail and quality control that he guaranteed made me feel good enough to want to give them a try.

Once I got them in the mail Sam gave me an idea of where to start at load development wise and I took off from there. The first thing I noticed was these bullets were extremely easy to be a load together for. Right outta the gate I was shooting Sub MOA and it only got better from there. I found a good node around 2955 fps MV and from that point on I loaded up 25 more of them and set out to validate the BC. I started with 3 shots at 500 yards and shot a 2.5" group, at first I thought the BC might be slightly off and closer to .750, but then I realized I hadnt set my 100 yard zero offset in my ballistics calc. After setting that I jumped out to 800 yards shooting at paper and not steel because I wanted to get the most accurate depiction as I could as to what these bullets were doing. I set the G1 to .800 and ran a 5 shot group at 800 yards and had a 4" 1/2 MOA group right on the money as far as elevation goes, the .800 BC was true and accurate. After shooting at 800 I stepped out to 1,000 again on paper, and shot another 5 shot group with essentially the exact same results. Nearly 1/2 MOA at 1,000 yards with 100% bullet stabilization, and I was getting to 1,000 with only 6.4 mils of correction with a 100 yard zero. This was much better than the 190 Bergers or the 180 Hornadys that I had shot prior.

I was very happy with the results in the 7 SAUM and during this time I also finished up at 7 PRC, again Proof carbon barrel, 1:8 twist. I did some quick load work up again with the 168's, running the same .800 BC and I had the exact same results outta both rifles that I ran them through. These bullets fly great and there is no BS in the advertised BC.

Something else that really impresses me maybe even more than how well they fly is how great they function on impact at 1,800 FPS. I have attached a pic of the results of an impact test at over 1,000 yards shooting into bags of water to simulate a soft tissue impact on game. Even without a hard bone impact these bullets entirely do their job. After shooting these in the .284 Cal stuff I put in another order for .277's as well as .264's and I am going to try them in a few more rifles. If cost is a concern a guy could certainly do his load development with these bullets and shoot something different for a practice round to spend time on the range. With as much money as we put into our long range guns, and tags, fuel, gear, everything it takes to put a hunt together, in my opinion spending money on good quality projectiles should be the least of your concern, because when the time comes to fill a tag that you may or may not have thousands of dollars into, I would like to give myself the biggest advantage possible and know without a doubt my bullet is going to perform when it counts. If you look at it from this view point, paying a little bit more money for a good bullet you know is going to be lethal should be entirely worth the time and money spent to put a load together to hunt with. Along with there is a lot to be said about supporting a small business and a good honest dude who you know is gonna stand behind his product. I couldnt be happier with my experience so far with the McGuire Ballistics Copper Rose Bullets.

Click to expand...