Justice1327
Well-Known Member
Saw this and found it interesting
What powder does Hornady use in their Precision Hunter ammo?
- Thread starter Justice1327
- Start date
Help Support Long Range Hunting Forum
Justice1327
Well-Known Member
I disassembled a few of my 300 PRC PH ammo last night, 2 differing lot numbers, and they used different powders. Seems even a large company like Hornady cant get enough of the same powder.
std7mag
Well-Known Member
I believe Hornady may even blend powders.
At least that's been the rumor for a few years now.
At least that's been the rumor for a few years now.
Justice1327
Well-Known Member
Yeah, I heard the same. We need someone on the inside to give us the real scoop.
Thank you for posting this. For me, it was a real eye opener.
I never would've believed that they'd use different powders in the same load. I always assumed that was why we couldnt find powder for reloading was because the large manufacturers were getting it all, but I agree that it appears they have the same problem.
Shane Lindsey
Well-Known Member
- Joined
- Jul 13, 2010
- Messages
- 3,812
Talked to a Berger rep when they discontinued the 200.20x in factory 308. I wanted to duplicate it as best I could.
He told me they either used Varget or N540, depending on what they had on hand. So sounds like they all do it.
He told me they either used Varget or N540, depending on what they had on hand. So sounds like they all do it.
The big companies will also get propriety powder that is not available in jug form. They also get it in batches that need to be trued up each batch. Jug powder we get is already mixed so lot to lot inconsistencies are minimized. So in some cases, you could never match their powder.
PApa Black
Well-Known Member
- Joined
- May 23, 2012
- Messages
- 447
Great information. Even though I reload everything I shoot its good information to pass on to those who don't. Thanks for sharing.
I don't mix different powders but as some of you have figured out even same powders of different lots may differ. I had 14# of H1000, simply poured all in to a five gallon bucket, snapped on the lid and rolled it around for a while. (During slightly humid day, out side on concrete drive way, away from the house). Worked well, several different lots, over a two year purchase. Now 14# of one homogeneous lot.
Also used H4350 under the 147gr ELD M and almost matched Hornady's perfectly to their match Ammo out to 500 yards.
Also used H4350 under the 147gr ELD M and almost matched Hornady's perfectly to their match Ammo out to 500 yards.
Friend I can't name gave me a case of Hornadys TAP .223 ammo. 55 grain Vmax bullets. Some of the best shooting ammo I've ever seen. I tried for months to duplicate it. I could get the same speed but not the same bug holes.My loads shot great but not as consistent as the TAP. Pulled the bullets and the powder looked like TAC, XBR. Etc. I used power pro varmint to get the best I could, But I don't shoot up the tap unless I'm trying to show out.
I took apart a cartridge of Berger ammo in 223 with the 77 grain OTM bullet. I wanted to duplicate it because it shot unbelievably well in my Tikka 223 Bolt rifle. I could not for the life of me figure out which Vihtavuori powder they used. I got very good groups with what I used but could not duplicate the velocity's they got.
Lenny Foffa
Well-Known Member
- Joined
- Mar 6, 2017
- Messages
- 1,673
Thank You so much for posting that video!!! I hand load, but I have friends who do not, and think a Box of ammo is a box of ammo. The concept of checking zero Box to box seems to be an unnecessary waist of ammo to them. Thanks again!!!!
