6.5 Creedmoor and Accurate 4350

John215 · Oct 2, 2021

Hello everyone, I'm in dire need of some advice on Accurate 4350. I'm assuming that the burn rate is similar to other 4350 powders, again "assuming," can be dangerous. Hoping someone has some experience with this powder and 130gr Berger VLD. Thanks in advance for any help. And yes, I'm well aware of the other powders that are probably far greater. This is just what I'm stuck with currently.

L.Sherm · Oct 2, 2021

I shoot alot of accurate powder in my small sage rat stuff only thing I dont like about it its temp sensitive.
I've never played with AA4350 I just wouldn't run max loads and try to reload as close to hunting Temps as possible.
AA4350is suppose to be one of the better accurate powders for temp sensitive.

Gunpowder · Oct 2, 2021

It's a pretty good powder to be "stuck" with ime. I've used a fair amount in the 6.5 behind 123 amax with very good groups.

Zen Archery · Oct 3, 2021

Yes its similar(ish) use Hodgdon 4350 as a guide since it is closer to burn rate...

draftpick · Dec 12, 2021

Best to just reach out to Alliant and see what loads they recommend. Even though they may similar burn rates they may act differently with pressure curves.

John215 · Dec 12, 2021

I finally scored on the rare H4350. Thanks for the advice.

laer4ur · Nov 9, 2024

Winchester staball 6.5 works well and not temp sensitive

laer4ur · Nov 9, 2024

I'm pushing 140g Barnes bthp, misc brass for now, win and cci primers, with 40g Winchester staball 6.5 in a AR10-18" and 22" barrels. No issues. I've gone hotter but don't have anything to calculate speed or pressure. The groups are .75" at a 100yds. Haven't gone further yet.

med358-boise · Nov 9, 2024

From another forum:

"Here is Accurate's reply to my request for AA4350 load data when tested with a: 24"barrel in 1-9"twist, using Winchester WLR primers.

120 gr..start load-40 gr(2525-2625 FPS)-Max load 45 gr(2825-2925 FPS)
129 gr..start load-40 gr(2500-2600 FPS)-Max load 44.5gr(2850-2950FPS)
140 gr..start load-39.2gr(2450-2550FPS)-Max load 43.5gr(2750-2850FPS)"

I would load a safety check load at 39.0 and 39.5 and then start an OCW process at 40.0

ballistictip1088! · Nov 12, 2024

John215 said:
I finally scored on the rare H4350. Thanks for the advice.

You'll be happy with this powder. I shot 144 Berger hybrids over h4350 and they hammer. Water line out to 1250 was impressive!

6.5 Creedmoor and Accurate 4350

John215

Active Member

L.Sherm

Well-Known Member

Gunpowder

Well-Known Member

Zen Archery

Well-Known Member

draftpick

Well-Known Member

John215

Active Member

laer4ur

New Member

laer4ur

New Member

med358-boise

Well-Known Member

ballistictip1088!

New Member

Similar threads

Recent Posts