Fast Twist Rem CDL SF 25-06

Jerryrva

Well-Known Member
Joined
Sep 27, 2018
Messages
90
Location
Richmond VA
The 2019 Remington catalog pdf page 112 of 116 is showing a limited edition of the above gun in 1:8 twist.
 
Last edited:
I can't find it... Got a screenshot or picture of it? The only 1:8" twist I see in the CDL SF is the 6.5 CreedWhore.

Screen Shot 2019-01-20 at 4.13.48 PM.png
 
Just found the 2019 Remington catalog... Page 112 shows the RM380 handgun...

But I think I found what you're referring to is on page 58... It's part # is: 84036

However, the catalog isn't giving any specs on it. Do you have any page numbers or anything that shows the specs of it?

https://remington-catalog.com/catalogs/remington/2019/pdf/2019-Remington-Catalog.pdf

On page 86, that new 40-X Stars & Stripes Edition looks badass!
 
Last edited:
Found it hidden on page 217...

You are correct... This should be a huge seller!

It's a Limited Edition, and the factory part number is: 84036

Screen Shot 2019-01-20 at 4.55.03 PM.png
 
Hmmmm, I've been wanting to buy a 25-06 for my youngest boy, maybe have that chamber AI'd?
 
Hmmmm, I've been wanting to buy a 25-06 for my youngest boy, maybe have that chamber AI'd?
For brass life and the 150+ FPS MV increase, I highly recommend it. Especially with that Blackjack 131 ACE that you can now take advantage of thanks to the 8" twist.
 
It doesnt make sense to me that Remington would do this. I highly doubt they're going to do an 8 twist for the one high bc 25cal bullet on the market unless they know something that we dont. It would make more sense to step up the 7mm twist as there's a boat load of high bc 7mms out there that their rifles cant handle. I'm going with the possibility of a typo. If it is true then that's great that they are thinking ahead, but I wouldnt count on it. Then again, since when does Remington do anything that makes sense:Do_O
 
Last edited:
Why don't all the gun makers offer a choice of twist on many of their guns? I mean really how hard would it be. Barrels can be made at the same cost in any twist. Screw it on and mark the barrel like Browning does. It's a no branier to me.
 
It doesnt make sense to me that Remington would do this. I highly doubt they're going to do an 8 twist for the one high bc 25cal bullet on the market unless they know something that we dont. It would make more sense to step up the 7mm twist as there's a boat load of high bc 7mms out there that their rifles cant handle. I'm going with the possibility of a typo. If it is true then that's great that they are thinking ahead, but I wouldnt count on it. Then again, since when does Remington do anything that makes sense:Do_O

Troublemaker! You're going to cause a heart attack with a statement like that. :cool:
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top