-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
xsn10s's latest activity
-
xsn10s replied to the thread Thin Factory Barrel Accuracy/Model 70 review.I wouldn't whack the barrel. You can go blind doing that. -
Faster than same weight cup and core? No. The Absolute Hammers are a little faster when using the right powder for them. I never saw...
-
Caught this young girl on a trot this morning with the 200gr 300 BLK. Never knew what hit her.
-
Definitely "MOC" (Minute of Coyote). Went out to the steel range today and sighted it in. Zeroed at 150 yds. Once I got it zeroed...
-
xsn10s reacted to FrogFire7's post in the thread Suppressor suggestion, under $800, 30cal and smaller with
Like.
Looks like it was $42 shipping (they ship it to their own dealer in your state, and then to you) and I got charged sales tax of $32... -
xsn10s replied to the thread What low recoil caliber for 300 wm action?.Another option if you reload it to try some of the starting loads with 168-175 gr bullets. Some of the loads are in the 308 win to 30-06...
-
A muzzle brake serves two purposes; reduction in felt recoil, and reduction in muzzle rise. The later is often not realized. Being able...
-
xsn10s replied to the thread What low recoil caliber for 300 wm action?.A can was my first thought. But really if whitetails and hogs are all you'll hunt with then as much as it pains me to say a 6.5 CM might...
-
xsn10s reacted to Laguna Freak's post in the thread What low recoil caliber for 300 wm action? with Like.
If it shoots good, get a brake or suppressor. If not, pick a cartridge and still get a brake or suppressor unless you go 6.5 Creed...
-
xsn10s replied to the thread Suppressor suggestion, under $800, 30cal and smaller.What are the additional charges for filing remotely with CA? TIA
-
xsn10s reacted to FrogFire7's post in the thread Suppressor suggestion, under $800, 30cal and smaller with Like.
I have a couple center-fire cans, not a lot of experience outside this but have fired a handful. My latest is a Harvester EVO. Small...
-
xsn10s reacted to VALKYRIETP's post in the thread First time failure with Thunder Beast Arms Ultra 9 DT GEN 2 and Silencer Co accessories. with Like.
Had a direct thread 5/8-24 that would not thread on a GAP rifle, MFG replaced it, second hub worked. So direct thread is not the only...
-
There's an octopus in the bed!!!!
-
So a while back, I decided that I was going to start putting my own rifles together using tikka actions and pre-fit barrels. I bought...
-
I just used the go gauge and put scotch tape over it. But it’s not a big deal how anyone wants to do it just as long as they are...