willtim's latest activity

Midway had 338 WM brass.

I'm 67 yo and love the Fire Dot.

No love for the Alaskan 360ti?

Be sure to store it "unloaded".

I'd love to spend enough time afield to cause uv degradation of the carbon wrap epoxy.....

Have you seen the YouTube video of the guys slamming a Proof barrel against concrete blocks?

With the Model 70, the important areas to bed is the “flat” where the forward stock bolt is located, the tang, and, the recoil lug...

I agree with this, including the middle screw(if your "particular" Model 70 has one…). I had a similar issue with a Model 70 stock...

I would be looking at bolt protrusion into the tang (rear screw) before I did anything else. Next would be binding of the mag box, it...

Try: 50 in/lb on front screw 25 in/lb on rear screw 5 (yes, 5) in/lb on middle screw You are bending your action at the rear tang with...

Thank you for all of the advice. I think bedding the recoil lug and tang will fix my problem. I've seen a few videos where people tape...

I don't mean to hijack your thread but how do you like the Alaska 360?

This was an unbelievable day and very proud of how she composed herself. Made a perfect shot at 124yrds and the bull didn't go 15'...

I would say contact HS Precision but since you had to dremel the stock to get clearance for your trigger, you are 'stuck' fixing this on...

After more investigating ( obviously I'm not a gunsmith ) the sear will not engage the firing pin when the rear screw is tightened...