Wilderness Blacktail's latest activity

I’d expect to drop 250-300 fps with a 16” barrel compared to a 24-26” barrel. Basically, you’d have the same performance as a 24” 7/08...

I'm doing a 16.5 inch 7prc at some point. My 6.5 saum is so much fun and handier than my 22 inch suppressed

I think you'll lose a lot more velocity cutting from 20 to 16, just based on the powders that the 7 typically uses. You could likely...

My thoughts is I really hope you do it and tell us what you think

I'm guessing the brass is thick at the neck shoulder junction and when you expand it, the neck shoulder junction gets moved out (like a...

Brass was new and fired in this rifle, also trimmed to spec. and does not touch the top of mandrel. I have repeated the sizing process...

he said that it chambers fine after sizing and the problem only occurs after using the expander mandrel that should eliminate a sizing...

Valid point, Can1010. When the necks are too thick, usually the bolt will not close at all or will be rubbing with the chamber acting...

I am trying to reload Norma brass, after de-priming, annealing, cleaning in tumbler, lube with Imperial wax, FL size with 2 th bump and...

if the problem occurs after he expands the necks that would be thick neck brass not the .200 line. load a bullet in the R-P, Peterson...

Send it back if your not satisfied. Sorry to hear it. They make Great Scopes. C.S. is great, they will make it right. EDIT: Back in...

I use a plumb bob line to line up the reticle.

I'm not saying that I don't believe you. And I have zero wants for a 300 anything. Especially a magnum. I already have a German made...

You mentioned federal premium 140 for 270, compared to factory federal premium 140 in 6.5 creedmoor (which is claimed125fps slower than...