Wilderness Blacktail's latest activity
-
Wilderness Blacktail reacted to WapitiBob's post in the thread Heavy Sporter Barrel in Sendero Barrel Channel with
Like.
I'm on my 4th barrel, 3 and 3B, all in a sendero barrel channel. Looks like they were made for each other. -
Wilderness Blacktail replied to the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer?.Thats a nice lookin round. What bullet? Speed?
-
Wilderness Blacktail reacted to codyadams's post in the thread 6.8 western from 7 SAUM brass with Like.
This is what I would put my money on. The case was pushed forward during firing, possibly out of the extractor, or it was never in it...
-
Wilderness Blacktail reacted to JAYgs8163's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
BINGO! Winner Winner Chicken Dinner! Hence, this! 3.080 Coal 270WSM long action .200
-
Wilderness Blacktail reacted to ObiJohn's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
From what I understand a .270 WSM with 175 gr bullets will not fit in a short action's mag box or feed from it, while 6.8 Western with...
-
Wilderness Blacktail replied to the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer?.I think the real reason they developed it is they didnt wanna confuse people with two loadings of 270wsm. As in a 1:10, 2.8" combo and a...
-
Wilderness Blacktail replied to the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer?.A Good way to get a visual reference is to look at a saami spec 260 remington with a 140gr n up bullet and then look at the 6.5...
-
Wilderness Blacktail reacted to McGuireBallistics's post in the thread McGuire Ballistics Feild Reports with Like.
300PRC 30Cal 178GR CR Mag Feed 646 Yards Entry side I believe
-
Wilderness Blacktail reacted to can1010's post in the thread 6.8 western from 7 SAUM brass with Like.
if possible pull bullets and expand necks to 30 cal. and then back down to 6.8 with the die backed off leaving a false shoulder...
-
Wilderness Blacktail reacted to Dashizzle37's post in the thread 6.8 western from 7 SAUM brass with Like.
I will give that a try. When I sized the cases I only did the neck but the whole neck. It will be easy to pull the bullets and reseat...
-
Wilderness Blacktail reacted to can1010's post in the thread 6.8 western from 7 SAUM brass with Like.
with a primer like that tells me your case was short and your bullet wasn't jammed. when sizing down your 7saum brass best to back your...
-
Wilderness Blacktail reacted to can1010's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
the 5 degree shoulder and couple thousands dia. is so small it is no different than fireforming any new brass to fit your chamber. to be...
-
Wilderness Blacktail reacted to JAYgs8163's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
Agree to an extent. If you build a 270WSM on a long action (as I did) more than likely one would modify the chamber with additional...
-
Wilderness Blacktail reacted to Jim’s Hunt's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
I would say yes by taking of about 1/4" of tenon rethreading a rechamber with a long throat. I just don't see any benefit in doing so...
-
Wilderness Blacktail reacted to JAYgs8163's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
I built mine with .200 Freebore and it’s a hammer.