Wilderness Blacktail's latest activity

When you raise the bolt handle to extract the case you hear an audible “ click” and feel resistance due to the web of the case sticking...

Only prevalent in the PRC cartridges .Something about the original Saami drawings. I rented the reamers and did all my guns in about 1...

Similar issues for me. Factory Hornady ammo ran fine. As soon as I switched to Peterson brass I started having bolt lift issues although...

That hard bolt lift part is what made me comment. I always get a little drag along with clickers, but not "hard" bolt lift. Hard bolt...

I would get a Hornady headspace comparator and see how much you are pushing the shoulder back from fired brass. You may not be resizing...

Search Alex Wheeler and rent one of his reamers,,,,magic and literally 10 minute job. Don’t even have to take gun apart. PM if you need help

The fix is to rent the AW reamer and open up the back of the chamber.

I just entered the short mag realm last year and hope to keep growing my collection! Congrats on finding a good load!

There’s something weird going on here…..because in addition to my doughnut “sticks” my wife ALSO made sausage patties, eggs (over...

Based on what you posted on your other thread it sounds like you’ve got a bad batch of Hornady factory 7PRC ammo? Is your rifle feeding...

It's mighty dirty - clean the snot out of it. I see brass or bullet shavings, etc. Clean everything from the start of the rifling on...

Does it also take them longer (more pressure) before they show ejector dots, swipes, feel to bolt lift etc?

I use CCI 450s in 6.5 Creed and 22 Creed (also 6mmBR & 6 Dasher) and have never had an issue. Pockets on SRP brass will last longer...

Congratulations from Washington resident also

That whole story is awesome. Dream come true.