Wilderness Blacktail's latest activity

I am not a big fan of comparing apples to oranges. It boils down to personal preference and intended purpose. I have .264 WM built to...

Have you found it true? the high pressure difference in like brand cases? Like i ran SRP to 46 grains before i found pressure signs...

I have never had a FTF or hangfire with any SRP down to 4°F. I shoot a lot of SRP when available in the smaller catridges based on...

By chance were these bullets blems? Ive had pressure spikes when trying those with a already tested load.

There is no way seating deeper .030” is going to increase pressure the way you describe, unless a massive overload was already present…...

I think jam to jump creates different issues than jump to jam because of the change in case capacity. I consider it a very valuable...

My point was something else is at play here. The seating depth isn't enough to cause this issue. The same as @MagnumManiac, I've gone...

Not in normal circimstances no. But he us 3 grains over max load beyond normal.

I agree, somethin else is goin on. I learned not to waste my components by doing a ladder and work up and then doing a new batch with...

If you had oil/solvent left in the chamber after cleaning, what you describe mirrors the results of what you saw. It is NOT high...

I no longer reply to these type of threads, but I will say, I have deliberately jammed bullets by .030” and never seen a rise in...

I could understand not wanting to shoot another one after seeing that, but curious if this was a one off that was waaaaay over charged...

.030" deeper and 200fps gain in velocity with way overpressure? I doubt it was the extra .030". Even if you were hard compressed to...

ALL of the rounds did that, or just one. I have done seating depth testing at .010" variations up to .070" or so from the starting one...

Exactly! My LCRx is in my front pocket with handloads and if i can get to it in the scrap im shootin whatevers closest. As mentioned...