Wilderness Blacktail's latest activity

I'm posting this because I think there is an enormous amount of disinformation about using suppressors for hunting. According to what I...

I've not really ever heard anything bad about Alpha. I'm using them in 7 different rifles.

Based on my experience with several calibers (not specifically 7-08), Alpha is just as good as Lapua in terms of longevity with...

I am using Starline brass and have been completely satisfied with it. I am not a competition shooter, so not concerned about that last...

I've heard some good said about Starline 7-08 brass.

Check where you are in the windage travel. If you are maxed out or near maxed out on windage, you will have very limited elevation. If...

Very cool. My favorite cartridge! Are both of the throats Saami? And if so are you going to have a lil freebore put in your rifle...

Here's the youth model. It's the only pic I have with it complete. Nothing special to look at now. Maybe I'll get to post an update with...

@OutsideBill, I was wondering just yesterday about that barrel. Having severe sellers remorse with that one. Lol I'll check my stash...

Went to the gunsmith. He checked the throat, did the marker test, looked at the marks on the bullet under magnification, checked the...

Marine-Tex might be good also. It's supposed to be hard. You can use some clear nail polish to hold the recoil lug into the action...

Not needed for its penetration on normal shots but the Partition buys a lot of penetration for quartering shots and the front half...

You can bed it. With several caveats. I'd only skim bed that area. And i'd use something hard, like Devcon, not Acraglass.

Action screw torque is 35inlb on the action screws. If you follow the action screw torque tuning, the front screw get tightened to...

One thing about the Axis. If you are planning on doing any trigger work, there is a spring loaded piece where the trigger assembly...