-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
waveslayer's latest activity
-
waveslayer replied to the thread Christensen Arms 16” 308 load data.Good looking rig, my buddy just replaced his barrel. He had the same issue, it got worse when he was running his can. So now, he... -
waveslayer replied to the thread Christensen Arms 16” 308 load data.Honestly. Bad barrel. I shoot a 17" MRAD and it's a tack driver with 175's . CA isn't doing so hot when it comes to performance these...
-
go Seekins instead great customer service and their rifles flat shoot,I will not own another fierce
-
No they are not worth that. Far from it. I've had a lot of them and currently have a rival. I won't be buying another one. After I fixed...
-
waveslayer replied to the thread Ramblings on ballistic app.Are you wanting to use CDM's or verify your own G1 or G7 drag models? If you want to take most of the guess work out, the AB will be...
-
waveslayer replied to the thread Ramblings on ballistic app.Trasol is amazing, you'll have to find an old version because it's not updated for Android, which i use. AB need to have all the...
-
waveslayer reacted to Coldfinger's post in the thread what caliber bullets can i size with a .45 smooth sizer ? with
Like.
Simplify life and try no wad at all. I did and will never shoot any wad at all. 1 ragged hole at 105 yards without a wad is good enough... -
waveslayer reacted to hudgic's post in the thread what caliber bullets can i size with a .45 smooth sizer ? with Like.
I’ve done .458 and down with a Hankins sizer with no issues
-
waveslayer replied to the thread Ramblings on ballistic app.What phone system do you run? Applied Ballistics TRASOL
-
waveslayer replied to the thread Another cip magazine question , this time 338 edge.I use CIP mags for my warbird. No issues at all
-
waveslayer reacted to lancetkenyon's post in the thread Another cip magazine question , this time 338 edge with Like.
No experience with XLR mags. But almost all my DBM mags I own (besides my AR and a couple Hawkins Hunter mags) are Accurate Mags. Their...
-
The OP already noted he used to measure to the lands, and your question was not definitive if you are asking as to “how-to” and that...
-
I find the lands and start from there. Then in seating depth testing, I back off in .010" increments for coarse testing, and .003" for...
-
get the hornady OAL gauge and the 7PRC case for the gauge. it is the most accurate, repeatable and easiest way to get the base to ogive...
-
As with anything else, YMMV. I prefer loading CBTO to the lands regardless of chambering.