Wachsmann's latest activity

  • W
    Wachsmann replied to the thread McGowen vs X-Caliber.
    Man the other day I was going through a worksheet for a stainless fluted and cryogenic treatment with muzzle threaded and the price is...
  • W
    I got the barrel off today and it came off pretty easy once I got the right shims for the wrench. So I wonder about the whole precision...
  • W
    Also I need to find the rest of my barrel removal kit. My rifle has the smooth barrel nut and the one wrench that is not splined does...
  • W
    Here are some of the measurements. muzzle is .704/.705…22 inches is .734…20 inches is .759….10 inches is .935 and at the 6.9 inch mark...
  • W
    I cleaned it back to bare metal yesterday and it looks like just from looking at the rifling the first 2 inches are not as deep as the...
  • W
    It’s shot good up to about 4500 rounds. It started opening up the groups after running about 300 rounds of higher velocities using some...
  • W
    That is the gun. I just put in the neighborhood of 5000 rounds down the pipe. I know it has now over 4800 for sure.
  • W
    I have taken measurements and it comes in between the 2 tapers or sizes. I had it out of the stock yesterday going over the...
  • W
    I had this rifle fo some time now and been thinking about rebarrelling the rifle. Everything I can tell the barrel is between a heavy...
  • W
    I shoot heavy loads. Mine are 168ABLR on top of 46.8 grn of staball at 2.800 mag box length. I think I can push the out just a little to...
  • W
    Wachsmann replied to the thread Help with 308 load.
    This is just me but I was having trouble with my 1/10 twist 308Win 26inch Howa with lighter bullets. Then for poops and giggles I loaded...
  • W
    Wachsmann reacted to Tucker65's post in the thread 245 Berger in 300 RUM with Like Like.
    I'm using them in a 300 prc also. N570 was only producing groups around 5/8-3/4. I wasn't happy with that and switched to H1000 and they...
  • W
    Wachsmann replied to the thread Hornady 190 CX/ .300 PRC.
    Just seen where Ron Spomer and Backfire TV host showed if shooting mono bullets (all copper) you need to clean to bare metal in the...
  • W
    Wachsmann replied to the thread What would you do?.
    Depending on how serious or how much you are willing to spend. This for me would be very tough to answer. I personally have never saved...
  • W
    Wachsmann replied to the thread 264 WIN MAG.
    Finally got out with the 264. Cleaned it out and then shot 3 and cleaned and shot 3 and cleaned and repeated this for 12 shots while...
Top