VinceMule's latest activity

I don't post much on here as I come to learn. However, this is a topic I happen to know a good deal about and can likely shed some...

Once bullet leaves the case the head stamp doesn’t matter. Try some 143 eldx or 140 eldm.

I admit I did not expect it to perform this well. I purchased a couple of factory ammo to break in the barrel. But it was grouping so...

If you don't break them down, expect runners. Put on a muzzle break to see which direction they run.

-Lapua 6.5x47L -400 rounds still sealed in the boxes they came in. -2 boxes lot#: P00685004/1552313 -2 boxes lot#: P00685001/0731113...

160$ shipped....USPS M.O.

42.0g of 8208 in lapua brass with a cci 200 shoots a bug hole with these bullets in my Krieger barrel with .070 freebore, but I am...

I’ll take this

On most if not all of my rifles I see no zero shift from cold bore to smoking hot bore. If you have any significant shift in zero cold...

I put very little weight in a 10 shot groups unless your testing the agg of the entire set of equipment in wide ranges of conditions, so...

Rifle barrels are good for 600-1200 rounds of their best accuracy, depending on the caliber and type of shooting. 308s are good for...

The only reason to shoot 10-shot groups is because it’s demanded by the actively PRS, NRL, prairie dogs, feral hog eradication. For...

I was pretty surprised at the speed. I did a quick Ladder to find pressure using SB 6.5, RL26, IMR 7828, and h4831. I expected rl26 or...

Darn near the same load, tad less, with a 130g Speer btsp will surely put a smile on your face, also.

7mm/08 with a 120 Ballistic tip is a deer killing machine.