VinceMule's latest activity

#notsurprised That state fights for the title of worst state in the union. Stiff competition with CA, NY, etc.

you may have to drop down to the 129s to get the speed you are wanting.

A year or two is a good start but if you have any common sense, you won't stop there....

While we imposed all the sanctions on Russia, they were busy becoming the major oil supplier for the African Continent, and China has...

I think PacNor is an overlooked barrel manufacturer. They really shoot well!

Before getting into the mechanical issues, have you greased the cocking ramp on the bolt and lightly greased the locking lugs? These...

check the front action screw, i had a mauser the had very hard bolt closing and lifting. the front screw contacting the right bolt lug.

Have you had it apart? Is it hard to lift the entire travel, or just at the start or at the end? I have my suspicions, but you will need...

I had a 10T with Pac Nor super match, three groove barrel with zero freebore in 257 Weatherby where I shot the 85-87's at ~4130 fps with...

Been shooting the big 257 since the early 1990s, You can search for some "special powder" but you probably won't beat RL 22 or IMR 7828...

JMO that we are in a Pre War state, Global conflict seems inevitable. Russia, China, Saudia Arabia want the dollar to collapse and have...

Magnum, you can use a 243 AI reamer, use a reamer pilot bushing adaptor for a 25 cal pilot bushing, then use a uni-throater.

I use my .260AI FL bushing die and neck down. That was my tweaks to the reamer design. JGS had a "25-308 Imp 40°" reamer, but it was...

I went with 6.5-300WSM back in 2001, I used a long action, then I looked at all of these newer options and went with 6.5x47 (2) and...

Finally picked up my upgraded 7 mm STW from Hart barrels in Lafayette, New York. 24-In #5 Hart barrel, 1-8 twist, precision tunable...