VinceMule's latest activity

Have you had it apart? Is it hard to lift the entire travel, or just at the start or at the end? I have my suspicions, but you will need...

I had a 10T with Pac Nor super match, three groove barrel with zero freebore in 257 Weatherby where I shot the 85-87's at ~4130 fps with...

Been shooting the big 257 since the early 1990s, You can search for some "special powder" but you probably won't beat RL 22 or IMR 7828...

JMO that we are in a Pre War state, Global conflict seems inevitable. Russia, China, Saudia Arabia want the dollar to collapse and have...

Magnum, you can use a 243 AI reamer, use a reamer pilot bushing adaptor for a 25 cal pilot bushing, then use a uni-throater.

I use my .260AI FL bushing die and neck down. That was my tweaks to the reamer design. JGS had a "25-308 Imp 40°" reamer, but it was...

I went with 6.5-300WSM back in 2001, I used a long action, then I looked at all of these newer options and went with 6.5x47 (2) and...

Finally picked up my upgraded 7 mm STW from Hart barrels in Lafayette, New York. 24-In #5 Hart barrel, 1-8 twist, precision tunable...

I shoot 58.0g of H4831 with cci 250 in Win brass, bullet is close to the lands, 140 Norma Tip Strike. My throat length varies between...

The 140 Tip strike is very accurate in an old well worn Ruger 77. 200 yd groups are very impressive, with H4831 with cci 250s, plenty...

I doubt you have a slow barrel. It's just likely the box velocities are over exaggerated, or shot in warm weather with a 30" test barrel...

In a slow 14 and 12 twists with zero freebore, the 55g Nosler loves H335 and AA2230 with rem 7 1/2 primers at 3900 fps, with 60g at...

I use Superformance with 145 ELD-X bullets, as well as the Hornady 140 Interlocks. Start at 54 grains and work up from there. This combo...

Split the difference, 25 Creed

Sold! PM sent!