VinceMule's latest activity

My brother and I shoot the 140 C/T in our 7 STWs with IMR 7828, Win brass, fed 215s. We have never had anything but very dead deer...

I mentioned it before but didn't add velocity. With Hunter I get 2875 with the 162 eldx out of a 20" barrel with excellent accuracy...

Given you compare the same caliber, A Remington 700 will differ from a Savage 110. Likewise, a custom Brux barrel in the same caliber...

Woodnut, respectively, I do not agree with your advise. I have my own 300yd rifle range, reload, clean barrels on the spot. It is easy...

I use the model that has a solid rod type wand in which I plug into an old lap top, love it! I use two of them, one at the lathe and...

I am going to disagree with this. Federal brass SUCKS. Almost as bad as Hornady (and sometimes worse). So in my opinion it would be a...

And you may be quite surprised at the precision attained with “blow out loads”.

PM sent on the 175 Elites. Per our PMs, I will take them.

on a 26", 3600 with 140s using 7828 with 215s should be real world....find pressure...your rifle can not read loading manuals. We have...

Check the CC capacity in water between the 28 Nosler and the 7 STW, good place to start with load data on the light bullets. I suggest...

Robo57, prayers for you and your family. The love these precious pets fills our heart and adds to the quality of our life.

I can recommend Norma Whitetail. I used Ammo Inc. Accubond to drt a hog, but they are not available anymore. This year I will be trying...

With the rifles I shoot past 500 yards I clean every 30 or so rounds. Some are worse than others , but if I don't clean them I will...

Peterson. You can neck down 308 brass, but be ready to neck turn as the case neck thickens.

The dents will disappear with a start load, let alone a ‘normal’ hunting load. It don’t take much to remove those dents, if a pistol...