VinceMule's latest activity

I once had brass from 3 different brands tested over a lot#. The brass varied 6% by brand and 12% over the three brands. So, this has...

Anneal and use a small base die. After a couple of reloads on my RUM, the cases would stick in the chamber after firing. I thought I was...

This problem is caused by a Classic issue amongst cases based on the 404 Jeffrey. The shoulder resists being sized by 2 things, cases...

Thanks for sharing, it explains a lot!

I wish that you could donate the barrel to a gunsmithing school, many could learn from the mistake.

I have a 10 twist 6mm AI and shoot the 87 Vmax at just under 3,500 fps using 50.5 grains of VN165. Accuracy is more than acceptable with...

If you like the 25s, and want more HP.... Again, 22" barrel, 135 Berger LRHT, shot # 115 from the barrel. This was max. First...

Panhandle, you may want to consider using JB weld to epoxy that brake on the barrel. Threads do wear over time. Threads cut to a class...

Beautiful deer Dude! Good shooting👍 That hole is definitely too big to weld closed.

Quintus, I had two of those rifles, years ago, and I shot factory ammo. I sold one to a friend that killed a lot of elk with it using...

Magnum's advise is spot on, and I would try that first. Simply put, the velocity when the barrel was shooting 1/4" groups was at a...

Not all 12 twists are the same, I had a Shilen 12T in 25/06 that would not stabilize a 100g Nosler ballistic tip, 100g Sierra btsp, nor...

I recommended these bullets because I have used all of them with success from a couple of different Sauer built 12 twist Mark Vs. They...

80g Barnes TTSX for the 12 twist, Barnes said it should work. These are borderline failures: 100Gr Nosler B-Tip 100Gr Nosler...

Could be a Marine thing?