Varmint Hunter's latest activity

A Berger 80.5 Full Bore bullet will solve all of your problems. It is much better suited to your 8" twist and will alleviate the case...

As long as you can maintain an exit pupil of 6mm-7mm the magnification shouldn't matter, all else being equal.

Woah - what's the width on that big boy?

Possibly, but I've got about 20 spare Redding TN bushing sitting on the shelf and would prefer to not start mixing brands.

I have two sets of FL dies in 300 Wby 1. RCBS FL set #15201 - $25 2. Redding FL & Nk set #80252 plus the Nk sizer (neck sizer does...

I had the correct bushing size, but it did not produce the correct neck OD. To be off .003" on a precision bushing is quite a lot. While...

I started handloading in 1978. I just recently threw out my original log books.

Magazine length will limit how far out that bullet can be seated regardless of freebore length. Unless, of course, he doesn't plan to...

If you remove the bushing, the neck will make no contact with the die. I suspect the bushing is actually a .308" and not a .311, as...

While anything is possible, I'm just passing along the info I received from numerous outfitters at the annual Harrisburg Show. In the...

I would expect a sized neck to measure at the bushing size or slightly more considering a bit of spring back.

Fired brass comes in at .315", but I'm not sure how the fired dimensions would make any difference.

I asked numerous elk outfitters what cartridge they recommended for hunting elk. The almost universal answer was to us a 300mag of any...

Working with a new set of Redding bushing dies and ran into an interesting problem. Loaded round neck diameter is a consistent .313". I...

No way Jose!