Recent content by Tucker65

You could use a Bat Vesper short action with their bottom metal and magazine set up and get 3.150 inside the magazine box. I've built quite a few 6.5 prc's on medium length actions for the extra length required to seat the 156gr Berger's above the neck shoulder junction. I think the neck one I...

https://www.gmriflebarrel.com/GMRBItem.aspx?Item=7.62-8-BLANK

I've built quite a few 6.5 prc's and the best velocity was with RL-26. In a 24" 7.5 twist barrel I could push them 3000 fps which is where they seemed to like to shoot speed wise. When RL-26 became hard to get I switched to N565. Only about 25 fps slower in the few rifles I've used in in since...

The Bullet Central micron dies will size the base of the brass smaller to help eliminate the clickers. I purchased one for a 300 prc and it sized the base .0015 - .002 smaller than a couple of different Whidden dies I tried.

Here's a little more info on the specs from their website. I didn't put it on the scale but supposedly the LA weighs 23oz The SKLTN utilizes the Remington 700 footprint, 75 degree bolt throw, two locking lugs, spiral flutes and M16 style extractor. The LW SKLTN utilizes a firing pin assembly...

I have a Pure Precision SKLTN LA mag bolt face, stainless steel action for sale. Bought this for a project but had a change in plans so it's no longer needed. These appear to be really nice actions, cycles really smooth, and fit and finish is just like any of the other well made custom actions...

If you're looking for new you might try Ryan Pierce. I believe he stocks them.

I also purchased a different tripod after the little short one that comes with the Garmin tipped over with some muzzle brake blast. I found this case too that the whole thing fits into that works well for storing it...

I've got one if you need one Kasey

Just when I was all set to get a pair of Leica geovid pro's. Now I'm not sure which way to go.

Don't mean to get too far off topic on Huntnful's thread but how are you guys that are pushing the top end loads determining what the max charge weight is for your rifle. Are you simply looking for stiff bolt, ejector marks, flat primers, or are you measuring the case head before your brass is...

I have been working on building a flush system for awhile and just about have it finished. I haven't chambered a barrel with it yet but I'm sure it's going to work just fine. I used a carbinator pump, a rotary union, and a 5 gallon fuel cell. All purchased off ebay at a very reasonable price...

https://www.longrangehunting.com/threads/defiance-anti-x-xm-action.349658/#post-3011685

I'll send you a picture of it in a pm

Short or long? I have a long action and also a short action with adjustable comb. Both M5 inlet and Proof sendero barrel channels.