Tiny Tim's latest activity

I definitely want at least 165 gr. I'm skeptical about the 308 for hunting even though I know its a darn good cartridge. I had a big...

Very nice! Congrats to the young man!

Only time will tell...but if what you have doesn't tickle your fancy....168 grs in just about any flavor

Any chance you or a good smith could polish the mating surfaces? At least make it consistent. Sounds like you have a good rifle and your...

Factory trigger- It's set as low as I can get it at 2lbs 9oz but I like it around 2 pounds and this seems like it's harder to pull...

How bad is the trigger? What action? Factory trigger? Inconsistent trigger can have alot of effect, depending on stability of your...

Last post 2009

If you are getting faint ejector marks at 2800 I would be hesitant to suggest a starting load. Mine tune between 60.9-62gr depending on...

Having shot thousands of 215's...try .015-.018 off and then again around .025-.030 off. There is another spot about .060 off that some...

I use a Forster case trimmer. Has a stepped collet shell holder.

Try another rimer and back off your load and work up again. When i started using br2 primers (only change to my load), I lost almost 40...

I believe it's a 7prc necked down to 6mm.

For deer and bear at those distances, 150-180 grain class bullets will all do fine. Been happy with Nosler Ballistic Tips, Accubonds...

Nosler Accubonds in 165gr or 180gr.

I would load up a few of each and see what it likes best. At 400 yards, BC doesn't matter much. I had issues with the 175 Bergers in...