Tiny Tim's latest activity

This advice comes from someone who has killed roughly150+conservatively deer with a bow, Worked in a archery shop and practiced year...

I am not a archery hunter, but I would like to compliment you on a good hunt and a great write up.

A razor sharp broadhead goes a long way.It will slice through every artery and blood vessel it touches where a dull one will simply push...

Then you're back to what KEC said. You have to get the reamer specs or try to get a ball end Mike into the neck to measure it. OR...

Great story. I believe it's a balancing act, but your experience shows that with the right equipment, even a relatively tough quartering...

In answer to your question, From what over half a century of bowhunting has taught me both are important, however, I have seen perfect...

Why would you install a 20moa rail on any of these rifles, rem 760, 7600, 740, 742, 7400, mod 6 or 4? These are 300yd rifles imo, have...

Are you looking thru the scope and dialing or shooting it and making adjustment as you see it on paper? The two procedures are opposite...

Check where you are in the windage travel. If you are maxed out or near maxed out on windage, you will have very limited elevation. If...

Gotta love and respect that kind of brutal honesty. Lol (And i k own the feeling).

Sometimes when a grand son, nephew, cousin or some such of a friend pulls into my driveway with similar issues wanting me to fix it I...

Make sure there are no paint bubbles on rings and bases that you already have. I once had a 40 MOA "paint bubble" on a set once. Shaved...

You can always check with whomever built your custom rifle. They will give you a direction with what products they recommend. Personally...

While I use Bore Tech products, it is worth noting that they must be completely removed from the bore when finished. If not, they can...

Interesting to see how things have changed for sure as far as ammo/brass availability