Tiny Tim's latest activity

I would get a 1-8" to run 180's. Throat condition could cause the bullets to come apart in mid flight too. Which is why I chose a 7mm...

Following. If the issue is "cold welding", does a "barrier" (graphite, HBN, etc...) help with this? What about military surplus? Is...

like i said earlier it belongs to my wife but yes i have shot a couple of times and hunted with it once. never had any issue with it...

Generally speaking, from SAAMI spec, loading longer increases case volume and decreases pressure, which allows more powder which...

Was this rifle substantially more accurate before? As in do you know it changed or is this the first time with it. And is so what were...

Minimum velocity for RELIABLE expansion is variable in my experience. Hitting bones makes a big difference once velocity is down to the...

First off, if you disassembled the rifle from the stock, do you know that you put ALL the parts back correctly? First thing to check is...

Also when tightening the action screws it may be necessary to think about how much torque is being applied, as in using an in/lb torque...

While Apart, Glass Bed, the Action with about, 1 inch of the Barrels "Shank Portion" All, the way Back to the Tang and, Free Float, the...

And make certain the recoil lug is pushed back against the lug recess in the stock before tightening the action screws

Welcome to the forum! What do you mean by "polished"? Tell us more about the rifle... wood stock? Free floated Barrel? Etc... Are you...

In my 308wins and have 7 different firearms in that cartridge, I can shoot 2 or 3 different weights that's within 15-20 grains. I don't...

300 RUM is my new ELR Been shooting it since 2005 but it was put in the back of the safe when I moved to 338 RUM and 338 Lap Fast...

Honestly I'd start over. You can't pick up a turd by the clean end.

Unless you have the action you want to use already I would get a 300 norma improved from alex wheeler, ryan pierce or dallas lane Easy...