Tiny Tim's latest activity

I my opinion vertical is what should be considered. I've done the same, powder charges as well as seating depth ( separate of course)...

I do most of my testing at 300. But I am fortunate to have a 300 yard berm either side of the shooting lane and generally in line with...

Here is a pretty little female I called in yesterday morning with a fawn bleat. Gorgeous fur with a white belly. Almost perfect except...

Great shot and beautiful scenery and rifle. Great story to boot. Thanks for sharing.

Great shooting and hoping mine does as well when it's assembled.

This rifle really seems to like heavies in 308. 130-155s do not shoot well at all from it (1:10 twist) but 165 and above are laser beams.

REDUCED LOADS? That's against my shooting religion. I'm a small guy with a Napoleon complex. My psyche requires a light rifle with...

I suppose you could so long as you'd only use that recipe with virgin brass. As others have made clear, your results will vary...

Sorry no help here but I find this on 223/5.56 range brass. In that case, if it doesn't fit the shell holder, I pitch it. Usually assume...

Alot of times it will take 2,3, or possibly more firings before you have to bump the shoulders back. It's likely still forming to the...

Can't develope a load, especially near max on virgin brass. Get one or, preferably two firings on the cases then try again. Too much...

On virgin brass you're developing a load for, you're wasting a lot of effort and material chasing a max load. Once you go to a 1x or...

I just broke in a 7rm with new Norma Brass. I was running monos with RL26 and got a noticeable gain on the second firing. I also topped...

Every rifle is different, that might be to much for my rifle.

H4350 for me. Lapua SRP Fed GM205M 42.0 H4350 115 VLD 2.188"CBTO 3095fps from 24" 1:7.5"