Tiny Tim's latest activity

Post your pics

Interesting, my own 7-08 was going to be a Howa 1500, but I sold it to fund a REM 700 SPS Stainless in 308 that was cheap, old stock NIB...

The donor rifle i have has a Timney on it already. Probably going to stick with 120gr. Nosler BT, 120gr. Barnes, and 140 AB'S for...

I know with straighter cases there is less need for trimming, so I assume that means less case stretch. I haven’t experimented in any...

Haha hey man, if it's what you like, don't worry. You'll never please 'em all. I just built a little woods gun myself on a Savage action...

Sounds like a nice rig. 7-08 is a fine cartridge! In the process of building a 308 "stand rifle", but went 20" barrel (considering a...

I had the same issue and had to use the OTM for practice. There was no difference. I found velocity the same with the lab radar and...

The rifle might not be over gassed, but the buffer spring might need to be heavier. A 4 O'clock ejection is typically a good thing. I...

I can get up to 47 gr behind a 80 grain Hammer Hunter in my 243AI, But only without a crimp. As @snox801 said, be careful working up as...

I would start low. And would not jump up more than .5gr at a time. Stabal is good stuff but pressures very quick when you get close to...

Following. Same issue here. The 300 grain EH are the RL26 of bullets.

Agree with @Bucklowery, sounds over gassed. Does seem odd that what I assume to be "factory" rifles having the same issue.

Sounds like over gassed. Where is it throwing your brass? Thanks Buck

Reading the ladder you have the 76.5 and 77 touching and 79.5,80, and 80.5 with 1" vertical. The general theory on the Audette ladder...

Thats called a pressure ladder not an OCW test. Though since you shot at 300yds you might be able to pick up an accuracy node between...