Tiny Tim's latest activity

Sounds like a nice rig. 7-08 is a fine cartridge! In the process of building a 308 "stand rifle", but went 20" barrel (considering a...

I had the same issue and had to use the OTM for practice. There was no difference. I found velocity the same with the lab radar and...

The rifle might not be over gassed, but the buffer spring might need to be heavier. A 4 O'clock ejection is typically a good thing. I...

I can get up to 47 gr behind a 80 grain Hammer Hunter in my 243AI, But only without a crimp. As @snox801 said, be careful working up as...

I would start low. And would not jump up more than .5gr at a time. Stabal is good stuff but pressures very quick when you get close to...

Following. Same issue here. The 300 grain EH are the RL26 of bullets.

Agree with @Bucklowery, sounds over gassed. Does seem odd that what I assume to be "factory" rifles having the same issue.

Sounds like over gassed. Where is it throwing your brass? Thanks Buck

Reading the ladder you have the 76.5 and 77 touching and 79.5,80, and 80.5 with 1" vertical. The general theory on the Audette ladder...

Thats called a pressure ladder not an OCW test. Though since you shot at 300yds you might be able to pick up an accuracy node between...

From your velocities, that would suggest a point worth investigating, but your POI is all over the place. Looks to be more of a...

I wouldn't really consider 22" a short barrel, but generally you do get fastest velocity with the same powders as a standard 26" barrel...

My advice is if you really desire to go down this road would be to pick two calibers with the same boltface that may use the same bottom...

While you certainly can do this, my advice is that if you want three different guns then build or buy three different guns. What works...

Generally, the powder that produces the fastest velocity in a longer barrel will also do so in a shorter one. The advantage of a faster...