Tiny Tim's latest activity

PROBLEM SOLVED. Once again, I really appreciated everyone's suggestions. I did as Hawkins suggested, and stretched out the spring...

SAMEZIES!!! And i will take it a step further and add... a constant steady downward stroke of the press handle to a soft stop every...

My take (without watching the video). For the perfect seat, you need perfectly consistent neck tension, perfectly annealed necks, and...

I agree with the spring tension that was mentioned, however, your first call should be to Hawkins and see what they tell you to try...

Do you have another mag to try. Spring pressure appears to not be lifting the front of the cartridge.

Hard to say without the gun in hand but… If you look at the 2nd photo, you can see that the cartridge does not contact the feed lips...

Never updated you guys. Simple retorque was all it needed, checked headspace and all was good. Easy peasy.

Yes. There was a thread on here about that funky Hornady ring on the case head. These all have it and they seem to slightly "crush"...

The eldm stuff was less than moa but darn it if for some reason the cheap savage varmint rifle I bought on a whim just loved their cheap...

Hornady ELD-X's and M's,. LIKE to "Jump" so, it shouldn't Be a Issue for, Accuracy IF, they are All,.. the SAME Lot #. ELD-X's in My...

I appreciate the input & conversation on the subject. This rifle happens to be a Factory built Ruger Frontier. I didn't whack 10" of...

Teeing of of this, What would be the lighted bullet you would use with h1000. In my 300 win mag. It’s a Christensen Arms ridgeline...

That's a shame. It'd be nice to get more than one firing from a case.

I had to switch to Magpro because of availability, and RL22 is a $70/lb. unicorn nowadays. It is the only powder I've used that I can't...

I don't disagree with you, but OP is maxed out on case capacity with no pressure. Without going to compressed load, he needs a faster...