Tiny Tim's latest activity

I realized that the Accurate mags without binder plates would allow me to load a 2.990 OAL 284 win cartridge to feed reliably. It was at...

As with anything else, YMMV. I have 3 .300 WMs, and they are all loaded differently. The original owner's 195 SMK and N170 is a...

My 300wm is limited to 3.60" OAL. I load them to about 3.57"

Just about a duplicate of mine including the Garmin

About 30 or 40 years ago, I made my bags from blue jean legs……stitch across one end, fill bag with sand, stitch closed. I don't shot...

This is my set up most the time. Caldwell tripod and leather bag.

Front, Atlas bipod and a quality rear leather bag. A heavy one. I want one of these wide ones but haven’t plunged yet. It’s rock solid

While I don't have a ton of experience, with a nine twist, I would shoot 200+ grain pills (Probably a 215 Target Hybrid) and look to...

190 gr Berger VLD Hunting bullet, CCI250 primer H4831SC powder shoots 1 hole groups in every gun I’ve shot. My load is over max listed...

208gr ELDM or Berger 208gr LRTH shoot lights out in my 300wm. I have a load with 7828ssc and H1000. The sweet spot for my rifle with a...

I don't like to be any closer than 10thou and sometimes 20. Depends on feeding.

NO Vacuum PACK with Primers. Just keep in a Enviromental stable area Like your home with Air Conditioning/Heat to have 50% humidity...

With your cartridges you probably need at least two powders if you can't get H-4895. H-4895-CFE223 for .204Ruger, .223 Rem, .22-50...

1.) H-4895 IF YOU CAN FIND IT 2.) Varget 3.) CFE-223-

Thanks everyone for your help. I took it apart and sure enough the gas block set screws were lose and it was misaligned. I put it back...