Tiny Tim's latest activity

Just thought I would pass along something that has helped me improve my shooting between range trips. The side yard of my backyard has...

When I've run into this issue, I generally like .030" or more shorter than mag length for Magnum cartridges. This seems to be fairly...

No Sir! I’m on two different forums, and this is an active topic on both. On the other forum I stated, “I do not measure…..but...

For the most part, I don’t have any bolt action rifles where this becomes an issue for me and I generally seat .015 to .020 CBTO. It...

Another reason for a mono, especially in a heavy recoil rifle. Before I changed to mono’s, by the time I got to the last round in the...

Great question and preface! Again, not the 190, but I believe Shawn Carlock has been having some success with the .338 300gr A-tip.

Looking for real world experience, or links to other sites with on-game reports or ballistics gel performance. For those screaming "You...

I just annealed several cases that I had put in a box for being hard to chamber. After annealing, I went through my normal procedures...

I once had brass from 3 different brands tested over a lot#. The brass varied 6% by brand and 12% over the three brands. So, this has...

Had a chance to put some rounds through my new rifle. Most parts came from this forum. Did the work myself. Plan is to run 153 HHTs but...

If you're considering the above, I agree with Kmccord, sell it. Why keep something that frustrates you and even if you find ONE load...

I have tried several different powders, a different scope, made sure everything is tight, way too many different bullets. Like I said...

WOW. I just read through 6 pages. Good for you, can't wait for pic and results. 👍

I ended up going with Dallas’s 338 Reaper. Didn’t take much to talk me into it. 26” Bartlein Diamond flute, LPR BAT, Nimrod stock...

Bringing back alive - got my new 338 Terminator dialed in. 300 gr Elites 2985-3000 with 106.0 n570 from 27” Hart fluted Sendero barrel...